Results 1 to 18 of 18

Thread: Another "newbie needs advice" post. . .

  1. #1
    Join Date
    Mar 2006
    Location
    East Lansing, MI
    Posts
    1,748
    Mentioned
    0 Post(s)
    Images
    3

    Default Another "newbie needs advice" post. . .

    My first--and only--brush to date is a Savile Row 101, which I am really enjoying. Its small, 20mm knot, with a faux ivory handle. While I think its been a great "starter" brush, I'd like to upgrade to a larger knot (24-26mm?) and a better grade of hair (super or silver tip).

    I like the feel of the SR101, and don't think I want a "floppy" brush head, but am starting to think a bigger brush with a longer handle would allow me to whip up better lather.

    Given these "requirements," I wait anxiously for your suggestions, knowing that there is a lot of expertise out there!

    Thanks in advance,
    Mitch

  2. #2
    Join Date
    Aug 2005
    Location
    New York
    Posts
    21,256
    Mentioned
    2 Post(s)
    Images
    764

    Default

    What price range?
    -Scotto


    Support B&B!

  3. #3
    Join Date
    Mar 2006
    Location
    East Lansing, MI
    Posts
    1,748
    Mentioned
    0 Post(s)
    Images
    3
    Thread Starter

    Default

    Hmmmm. . .? I think around $100 if need be. How much do you think I need to spend to get what I want?

    Mitch

  4. #4
    Join Date
    Aug 2005
    Location
    New York
    Posts
    21,256
    Mentioned
    2 Post(s)
    Images
    764

    Default

    If it were me, I would get one of the new Savile Row Silvertips. Simply awesome brushes, and should be a good contrast from what you have now. Try here, as well as doing some more searching - there are lots of handle offerings out there. I have a 3124 and just adore it. The knots are super-packed, so the actual size tends to run a bit bigger than the quoted knot size.
    Last edited by Scotto; 05-05-2006 at 08:27 AM. Reason: Fixed link
    -Scotto


    Support B&B!

  5. #5
    Join Date
    Mar 2006
    Location
    East Lansing, MI
    Posts
    1,748
    Mentioned
    0 Post(s)
    Images
    3
    Thread Starter

    Default

    Thanks. . .though I'm hankering to try a different brand of brush--but if you think the SR is a better choice it may be worth the purchase?

    Mitch

  6. #6
    Join Date
    Aug 2005
    Location
    New York
    Posts
    21,256
    Mentioned
    2 Post(s)
    Images
    764

    Default

    The SR silvertip to your 101 will be like a different brush. Other options would be Shavemac or Simpsons if you are looking for dense, firm shafts and soft tips. Any of these choices are perhaps a bit above the price range you are looking for, but given your criteria this is likely the correct price point.

    The other option to keep the price down is to buy a used brush if you keep an eye on the various forums.

    DrP will likely chime in with his encyclopedic knowledge and quasi-infinite inventory of brushes.
    -Scotto


    Support B&B!

  7. #7
    Join Date
    Aug 2005
    Location
    South Central Oregon
    Posts
    7,741
    Mentioned
    0 Post(s)
    Images
    228

    Default

    I'll second the vote for one of the new SR brushes, or go with a Shavemac.
    It's sage advice, and the brushes are first class.

    Randy
    "I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them." J. B. Books
    Shazam!
    Another memorable quote!
    Hall of Fame
    Remember Alex Brown

  8. #8
    Join Date
    Sep 2005
    Location
    California
    Posts
    2,210
    Mentioned
    0 Post(s)
    Images
    64

    Default

    Scotto and Randy are dead on.

  9. #9
    Join Date
    Jan 2006
    Location
    North of the Red River
    Posts
    4,551
    Mentioned
    1 Post(s)
    Images
    218

    Default

    Yeah, what those guys said.
    -Kyle
    ...the police often question him, just because they find him interesting...his blood smells like cologne...

  10. #10

    Default

    I'd go with a Savile Row as aformentioned, but if it were me - I'd get a Simpson PJ2 super - or if you can/will spend the $ a PJ3. The PJ2 is about 22-23mm, the PJ3 24-25mm, but both act a HELL of a lot bigger than they actually are, both are built like tanks, and both offer the best "comprimise" between stiffness and softness. While I have owned several models of simpson - the PJ2 is my favorite, in fact - it is my favorite shaving brush.... period.
    - Joel
    joel (at) badgerandblade.com

  11. #11
    Join Date
    Aug 2005
    Location
    Netherlands
    Posts
    1,060
    Mentioned
    0 Post(s)
    Images
    54

    Default

    Quote Originally Posted by Scotto
    The SR silvertip to your 101 will be like a different brush. Other options would be Shavemac or Simpsons if you are looking for dense, firm shafts and soft tips. Any of these choices are perhaps a bit above the price range you are looking for, but given your criteria this is likely the correct price point.

    The other option to keep the price down is to buy a used brush if you keep an eye on the various forums.

    DrP will likely chime in with his encyclopedic knowledge and quasi-infinite inventory of brushes.
    Mitch,

    If you like the feel of your Savile Row brush then you'll only have to stick to them and look for another model:bigger handle, bigger knot in the super range.

    if you want to try a different brand then i think the Simpsons in best are the way to go; but you should be prepared to pay a severely higher price; even more expensive of course are the Simpsons in super; take a look here to get an impression.

    It's not easy to find a brush that fits your requierments exactly; imo THE perfect fit regarding a shaving brush doesn't exist really; it depends on your mood, wether you use soap or cream, wether it's weekend or not, wether you have one day beard growth, two or even more days, etcetera.

    If you want a reliable "work horse": stick with the SR's; if you want to drive a Maserati, then go for a Simpson.

    Regards. Peter
    Peter

  12. #12
    Join Date
    Mar 2006
    Location
    East Lansing, MI
    Posts
    1,748
    Mentioned
    0 Post(s)
    Images
    3
    Thread Starter

    Default Narrowing it down. . .

    I think I've narrowed this down to 2 brushes:

    Shavemac 436, $127US

    Simpsons PJ2, 98 pounds ($182US?)

    Comments, advice???

    Mitch

  13. #13
    Join Date
    Aug 2005
    Location
    Netherlands
    Posts
    1,060
    Mentioned
    0 Post(s)
    Images
    54

    Default

    Obviously you don't care about the price difference; because of appeal i would choose the Simpsons PJ2; it's a very good all purpose brush, beautiful elegant handle shape, high quality bristles and it's a Simpson!!!! What else is there to be desired......

    But if you want to save $55,- and want a no-nonsense all day multi purpose shaving brush from a high quality no nonsense brand, then go for the Shavemac....

    Needless to say, i would personally go for both

    Peter
    Peter

  14. #14

    Default

    Quote Originally Posted by mrob
    I think I've narrowed this down to 2 brushes:

    Shavemac 436, $127US

    Simpsons PJ2, 98 pounds ($182US?)

    Comments, advice???

    Mitch
    AHHHH - don't spend $182!!!!

    Email or call Lee at Lee's Razors mention you are a member of B&B - and you'll get 20% off and free shipping. The price he'll give you out the door should be mighty close, if not a little cheaper than the Shavemac (after you factor in shipping from Germany).
    - Joel
    joel (at) badgerandblade.com

  15. #15
    Join Date
    Mar 2006
    Location
    East Lansing, MI
    Posts
    1,748
    Mentioned
    0 Post(s)
    Images
    3
    Thread Starter

    Default We have a winner!

    Well. . .after several days of research and advise gathering, it looks like we have a winner in the "brush-off". . .and the winner is------------

    a Simpsons PJ3 in Super. I know, I know--its more money than I said I wanted to spend, but after reading all of the glowing posts--and PMs!--extolling the virtues of the Simpsons line, I simply could not resist. Sound familiar???

    This beauty is on order from Lee of Lee's Razors, and should be in mid-Michigan by mid-week. I look forward to reviewing it--I notice there are no PJ reviews on the Reviews pages to date--after a proper break in period. Can't wait.

    Thanks to everyone for your help and guidance.

    Mitch

  16. #16
    Join Date
    Mar 2006
    Location
    East Lansing, MI
    Posts
    1,748
    Mentioned
    0 Post(s)
    Images
    3
    Thread Starter

    Default Its here!

    The blessed event has happened! My PJ3 arrived in the mail today. Its a thing of beauty, and if I wasn't sick today I'd be fighting off the urge for a midafternoon shave just to see how it works.

    Now--any advice on what to do first with a new brush? Should I soak it or wash it with something. . .or simply use it?

    Thanks,
    Mitch
    Mitch

    Go Green!

  17. #17
    Join Date
    Aug 2005
    Location
    Netherlands
    Posts
    1,060
    Mentioned
    0 Post(s)
    Images
    54

    Default

    Mitch,

    Simply use it right away and ENJOY!!!!


    Peter
    Peter

  18. #18
    Join Date
    Aug 2005
    Location
    New York
    Posts
    21,256
    Mentioned
    2 Post(s)
    Images
    764

    Default

    My routine is to give new brushes a wash in Johnson's Baby Shampoo (we have lots of that around ) to de-funkify it a bit, and then I lather it up with Taylor's Avocado and rinse, for a bit of conditioning action.
    -Scotto


    Support B&B!

Similar Threads

  1. Replies: 19
    Last Post: 10-23-2012, 07:13 PM
  2. Replies: 9
    Last Post: 07-14-2011, 03:41 PM
  3. Any Advice for a newbie with a "shavette"??
    By wdwrx in forum Straight Razor Shave Clinic
    Replies: 3
    Last Post: 01-19-2010, 09:17 PM
  4. "Newbie needs Advice"
    By Fox in forum Shave Clinic & Newbie Check-In
    Replies: 5
    Last Post: 04-03-2007, 04:47 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
By accessing Badger & Blade, you agree to abide by the Terms of Usage. You can find our Privacy Policy here.
Once submitted, any posts, images, or content become the property of Badger & Blade.
Powered by vBulletin® - Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.