Results 1 to 9 of 9

Thread: Printing Guide

  1. #1

    Default Printing Guide

    Hey all,

    As I mentioned in another post, I am beginning a darkroom. This is for my photo major at school.

    I am looking for a good guide to printing in the darkroom. I can already process the negatives (I'll be doing 35mm until I get an 80mm lens for my enlarger), so I would just like a guide that says do this, then this, then this, then this (which aperture to set the lens on, etc). Dunk in this, rinse, etc. If anyone could help me out, I would much appreciate it!

    Tyler
    [URL="http://www.tylerpuckett.com"]My Photoblog[/URL] [URL="http://flickr.com/photos/brofkand/"]My Flickr[/URL]

    Merkur 23C or Barberpole

    Nikon D40 w/ 35mm 1.8
    Nikon FG w/ 50mm 1.8
    Mamiya m645 1000s w/ 80mm 2.8

  2. #2
    Join Date
    Oct 2007
    Location
    College Station, Texas
    Posts
    529

    Default

    Kodak: Teaching Basic Darkroom Techniques
    It's a start..

    But, this book goes into MUCH greater detail. Seriously, just order it and you will be glad you did.
    Last edited by Beast; 08-07-2008 at 04:56 PM.

  3. #3
    Thread Starter

    Default

    Thanks! That appears to be what I need. Everything is coming in tomorrow (ordered from Freestyle; I already had an enlarger and trays, just needed chemicals and a safelight). Is it bad that I've considered calling in to work so I can go shoot a few rolls of film and develop them so I can break in my equipment?

    Tyler
    [URL="http://www.tylerpuckett.com"]My Photoblog[/URL] [URL="http://flickr.com/photos/brofkand/"]My Flickr[/URL]

    Merkur 23C or Barberpole

    Nikon D40 w/ 35mm 1.8
    Nikon FG w/ 50mm 1.8
    Mamiya m645 1000s w/ 80mm 2.8

  4. #4
    Join Date
    Oct 2007
    Location
    College Station, Texas
    Posts
    529

    Default

    AND...

    Remember to someday try your hand at lith printing. It can be frustrating as hell, and no two prints will ever be the same, but the results can be beaaautiful.

    For examples of lith printing, do a search on Anton Corbijn and uhm, lith printing and check out his photos of U2, Depeche Mode, etc.

  5. #5
    Thread Starter

    Default

    I have seen some lith printing results, and it does look cool. The contrast you get almost looks like a mistake. I will definitely have to try it.
    [URL="http://www.tylerpuckett.com"]My Photoblog[/URL] [URL="http://flickr.com/photos/brofkand/"]My Flickr[/URL]

    Merkur 23C or Barberpole

    Nikon D40 w/ 35mm 1.8
    Nikon FG w/ 50mm 1.8
    Mamiya m645 1000s w/ 80mm 2.8

  6. #6
    Join Date
    Oct 2007
    Location
    College Station, Texas
    Posts
    529

    Default

    Yeah... when done right tho it's still contrasty but not splotchy.. I saw some lith examples in JPG magazine recently and they were absolute crap.

    When I did some in college, it took me about 30-40min for EACH print... that's just time under the enlarger and time in chemistry.

  7. #7
    Thread Starter

    Default

    I did it tonight. It was amazingly fun. Once the prints dry I'll scan them and post the results. Let's just say you'll be able to guess my first, second, and third print without too much trouble :-)
    [URL="http://www.tylerpuckett.com"]My Photoblog[/URL] [URL="http://flickr.com/photos/brofkand/"]My Flickr[/URL]

    Merkur 23C or Barberpole

    Nikon D40 w/ 35mm 1.8
    Nikon FG w/ 50mm 1.8
    Mamiya m645 1000s w/ 80mm 2.8

  8. #8
    Join Date
    Oct 2007
    Location
    College Station, Texas
    Posts
    529

    Default

    It's cool that it makes you so happy. Some people just don't get it, or understand why or how someone would pursue a degree (and career) in art or anything creative. It's certainly not as easy to lay down in financial terms as in going to work at a desk for a big company, but for those of us who are passionate about it, it's so rewarding. Satisfy your soul and artist inside you. Money can't buy that, but money will come.

    Do what you love and don't ever let anyone hold you back or try to convince you that you should be doing anything else.

    ...and have a camera with you at ALL times. Backpack. Car. BE the guy at parties that has a camera. It'll make you a better photographer and you'll never regret missing the moment you didn't capture.

  9. #9
    Thread Starter

    Default

    I absolutely get it. Our culture is so money-hungry nowadays. Go to college to get a good job to get rich.

    Parents tell their kids, you can be anything you want to be when you grow up. But, when those kids grow up and say, "I want to be a painter!" The parents say, "OK honey, we'll go ahead and register you for Harvard Law. Paint still life of courtrooms."

    I keep a $1 camera in my car at all times. I've gotten the most amazing shots with it. I can't wait until the roll is finished and I develop it. The really interesting thing is it's color print film and I'll be developing in B&W. Unless a chemical fire ensues, I'm sure I will get some pretty cool results from that.
    [URL="http://www.tylerpuckett.com"]My Photoblog[/URL] [URL="http://flickr.com/photos/brofkand/"]My Flickr[/URL]

    Merkur 23C or Barberpole

    Nikon D40 w/ 35mm 1.8
    Nikon FG w/ 50mm 1.8
    Mamiya m645 1000s w/ 80mm 2.8

 

 

Similar Threads

  1. Ever Ready & Williams Printing blocks
    By probesport in forum General Shaving Discussion
    Replies: 8
    Last Post: 04-14-2011, 07:06 AM
  2. Please consider the environment before printing this email.
    By FreezerBurns in forum The Barber Shop
    Replies: 45
    Last Post: 09-27-2010, 10:01 AM
  3. 3D Printing One's Own Shave Gear
    By skipsmagee in forum General Shaving Discussion
    Replies: 17
    Last Post: 06-07-2010, 10:10 PM
  4. What I do: I love printing!
    By Edcculus in forum The Barber Shop
    Replies: 6
    Last Post: 02-02-2008, 08:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •