Cut the Plisson synthetic knot from the L'occitane Cade handle and placed it into a 23.5mm faux ivory handle from TGN.
I had to grind down the inside of the handle with a dremel and sanding bit so the lip of the metal cup could sit down on the edges of the hole in the handle. Used 5 min epoxy to set the knot, but will let set for 24 hrs before using.
I had to grind down the inside of the handle with a dremel and sanding bit so the lip of the metal cup could sit down on the edges of the hole in the handle. Used 5 min epoxy to set the knot, but will let set for 24 hrs before using.
