Hey all you Restorers

**bobfarvour** · 04-23-2011, 06:30 AM

Cream K40

**bobfarvour** · 04-23-2011, 06:37 AM

Red on White 100

**bobfarvour** · 04-23-2011, 06:40 AM

White on Red 100

**bobfarvour** · 04-23-2011, 06:41 AM

Red on White 100A

**bobfarvour** · 04-23-2011, 06:44 AM

Black on White 150The ferrell from the Omega Boar makes it look a little taller. Sorry for the dirtiness, I just used it yesterday.

**bobfarvour** · 04-23-2011, 06:46 AM

White on Black 100T

**bobfarvour** · 04-23-2011, 06:49 AM

300N This was butterscotch, but it required so much sanding due to it's poor broken condition that there isn't much butterscotch left.

**bobfarvour** · 04-23-2011, 06:51 AM

Blue on White 50H

**eastomjac** · 04-24-2011, 05:32 PM

ok,here are three,one everreadyC40,ones a burma shave boar,which im going to put a badgerknot into,the other is an older?made in tiwan roc i had around,looks old w/my burham1909's

**Lucky11453** · 04-24-2011, 08:10 PM

Originally Posted by bobfarvour

Blue on White 50H

You have a nice collection of Ever-Ready brushes there Bob.

**Lucky11453** · 04-24-2011, 08:18 PM

Another couple of my favorites

That black and tan Ever Ready handle looks very user friendly.

**fizgiggsr** · 04-25-2011, 08:48 PM

Here are two pictures of my 250PB in White/Red. These are all before restore, which I'll update once that has been completed.

Hair: Pure Badger
Knot: 18 mm
Loft: 40 mm
Base: 55 mm

**epd** · 05-24-2011, 06:58 PM

This is my first practice restore, I stole the knot out of my wilkinson sword boar brush- got the brush off of ebay looking so gross that even after all this work im still not sure if ill use it

Notice the chrome trim ring around the knot, im pretty happy with how this turned out.

**Hex** · 05-25-2011, 05:59 AM

Originally Posted by epd

This is my first practice restore, I stole the knot out of my wilkinson sword boar brush- got the brush off of ebay looking so gross that even after all this work im still not sure if ill use it

Notice the chrome trim ring around the knot, im pretty happy with how this turned out.

That's a beauty EPD, and I insist that you give it a try or, failing that, forward it to me and I will put him through his paces.

**eastomjac** · 06-03-2011, 10:54 AM

ok i finaly got my knots in from woodcrafters for my c40 and tiwan roc ,so here are the pics before and after the knot size is 20mm

;

**eastomjac** · 06-09-2011, 03:18 PM

here's my new'est 200t with a new tgn silvertip 20mm;

**bigfoot83** · 09-11-2011, 06:38 PM

(That's weird...when I originally posted these, the photos were coming in from the side!)

Ever-Ready 100T (My son's daily brush.)
Overall Height 102mm
Handle Height 51mm
Brush loft 51mm
Knot 20mm TGN Finest Fan extra hair

Ever-Ready 200T
Overall Height 104mm
Handle Height 53mm
Brush loft 51mm
Knot 20mm TGN Finest Fan

Ever-Ready F40 (Son's gift when he gets his first position post-college.)
Overall Height 104mm
Handle Height 52mm
Brush loft 52mm
Knot 20mm TGN Finest Fan extra hair (unbloomed)

Ever-Ready C40 (Used for soaps or travel)
Overall Height 99mm
Handle Height 52mm
Brush loft 47mm
Knot 20mm TGN Best

Ever-Ready 300PBT (Used for travel)
Overall Height 98mm
Handle Height 56mm
Brush loft 42mm
Knot 16mm TGN Best

Ever-Ready 300
Overall Height 105mm
Handle Height 55mm
Brush loft 50mm
Knot 22mm TGN Finest Fan extra hair

If you need any more info, please let me know.

**noahpictures** · 09-24-2011, 05:14 PM

Made Rite Lucite. At the bottom of the handle it reads: Made Rite USA Set in Rubber. Pure Badger 72.

Handle Height: 38mm
Handle Width at widest point (bottom): 34mm
Badger Hair Height: 44mm
Bore opening: 19-20mm across

**noahpictures** · 10-06-2011, 11:29 AM

Century green top, cream bottom brush. Front of the brush reads, "Century, Set in rubber, sterilized, made in the USA." Back of the brush reads, "Pure Bristle". Nothing is written on the bottom. The handle is hollow. The handle feels right in my hand and is impressively ergonomic.

Handle height: 53 mm
Handle base width: 30 mm
Bore width: 20mm

**Blade Boy** · 10-08-2011, 08:50 PM

Originally Posted by spanx

Here are a couple of brushes not ever-ready but still vintage. I hope you can use them.

First up:

Plymouth
5
Overall length 164mm
Handle length 88mm material unknown to me
Brush loft 76mm
Knot diameter 30mm
Boar bristle

Next up:

Shumate
350
Overall length 117mm
Handle length 66mm material unknown to me
brush loft 51mm
Knot diameter 21mm
Badger bristle

Man that Plymouth with the amber handle is totally awesome, hope to come across one those in the future.