Results 1 to 8 of 8

Thread: Sharpening stones for pocket and hunting knives

  1. #1

    Default Sharpening stones for pocket and hunting knives

    Currently I don't have any way to sharpen my pocket, hunting, and kitchen knives (besides the steel rod which I don't think actually sharpens). I was thinking of going with the Spyderco Sharpmaker. My father used had a lansky sharpener set that was ok. I was also thinking of getting some sharpening stones and sharpening them free hand. I know freehand sharpening will take a lot of practice but I feel that in time, it will be more versatile and easier to obtain a razor sharp edge than using a Spyderco Sharpmaker.

    Any suggestions?

    My budget right now is only $50 but if I can get something for cheaper, then I am all for it.

  2. #2
    Join Date
    Jul 2008
    Location
    The True North Strong and Free
    Posts
    8,369
    Images
    37

    Default

    I started with a 1000x water stone. It was all I needed for a long time. When I got into razors I found that I actually liked my kitchen knives a bit sharper.

    You can find a 1000x or 1200x at less than $30. I'd be tempted to go with a 800/4000 combination if I were to start again. I see woodcraft have one of these for less than $30 as well.

    I'm sure there will be more advice coming so don't rush.
    Mike

    Need help? Ask a Mod

    Please help support Badger and Blade.

  3. #3
    Thread Starter

    Default

    Quote Originally Posted by Alacrity59 View Post
    I started with a 1000x water stone. It was all I needed for a long time. When I got into razors I found that I actually liked my kitchen knives a bit sharper.

    You can find a 1000x or 1200x at less than $30. I'd be tempted to go with a 800/4000 combination if I were to start again. I see woodcraft have one of these for less than $30 as well.

    I'm sure there will be more advice coming so don't rush.
    I was thinking maybe a combination set like you mentioned. If not maybe two-three single stones.

  4. #4
    Join Date
    May 2008
    Location
    La
    Posts
    2,870

    Default

    I use three Arkansas stones for softer steel blades (normal pocket knife like AUS8 or carbon)

    That sharpmaker is tough to beat. It's that good. What kind of steel? If ats34 or s30v you may need to diamond stick for the sharpmaker also.

    If you have a tough steel and like free hand, then a fine diamond hone also works well for me. Freehand though.

  5. #5
    Join Date
    Apr 2011
    Location
    San Diego
    Posts
    25
    Images
    1

    Default

    Since you are a beginner i would recommend trying to find a spyderco triangle sharp maker (I don't like Lanskey)... it takes some of the guesswork out of finding the right angle you can pick up a used one for about 40$ (just don't drop the sticks because they break like glass). I do professional knife sharpening for a friend of mine that makes knives so i have found that the best possible edge depends on the type of steel. i currently have a range of stones from 500 -12000 grit including water stones (natural and man made), diamond, composite and arkansas stones ( i do it all by hand without the use of a slack belt sander) . I would say if you want to learn to sharpen knives on a flat stone that you get a hand full of swap meet knives that you could practice on with out getting upset when you f%^&* them up. Try to get knives that have different blade profiles and at least a couple of Tanto blades because i promise you that on that one you will get it completely wrong the 1st time, 2nd time...12th time. The hardest part on any style blade is getting the angle the same on both sides ... don't get frustrated. I have been honing my skills(no pun intended)for about 20 years and just in the last 5 years i got to a point where i would consider my self skilled enough to start it as an actual side business. As you get better you will start to look at knives that you can see at shops and realize that companies put so much into R&D for metal composition and blade profile and then hand it off to some guy that runs it across a glorified belt sander to sharpen it... STUPID. As far as what kind of stones you need to get started ... don't go high end but you need to get a lapping stone if you get water stones so that you can keep the working surface of the stones flat. Good luck
    Shoot first... Shoot some more... Then if anyone is still alive ask some questions

  6. #6
    Join Date
    Oct 2010
    Location
    My Grandmama's Condo
    Posts
    12,349
    Images
    16

    Default

    I have a sharpmaker, and it's good. Free hand is good too, it just takes time to learn.
    ~ ​​Kent
    <[Self-certified Straight Shaver]>
    。。現在日本剃刀に夢中。。

  7. #7
    Join Date
    Jan 2008
    Location
    Ajax, Ontario
    Posts
    8

    Default

    I know its out of your budget but in my opinion the best sharpening system for knives is the edge pro. With this sytem you can sharpen any knife razor sharp and although it is expensive to buy it will be the only system you need.

    http://www.edgeproinc.com/

  8. #8

    Default

    Norton IM2 red India/black Crystolon combo. It's an inexpensive synthetic that works... I think the red side is like 320 grit.. and the black is about half that... The 11" version is under 40.00....

Similar Threads

  1. Sharpening Pocket Knives
    By FiXXXer in forum The Speakeasy
    Replies: 18
    Last Post: 11-26-2010, 06:54 PM
  2. Using Hone stones for sharpening knives?
    By mkornecki in forum Hones/Honing
    Replies: 13
    Last Post: 05-11-2010, 12:20 PM
  3. How do you go about sharpening your pocket knives?
    By sapito318 in forum The Barber Shop
    Replies: 12
    Last Post: 05-22-2009, 09:33 AM
  4. sharpening stones ?? - Japanese and German knives
    By expatCanuck in forum The Barber Shop
    Replies: 8
    Last Post: 02-26-2009, 09:09 AM
  5. sharpening pocket knives
    By soulshine in forum The Speakeasy
    Replies: 13
    Last Post: 03-15-2007, 08:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
By accessing Badger & Blade, you agree to abide by the Terms of Usage. You can find our Privacy Policy here.
Once submitted, any posts, images, or content become the property of Badger & Blade.
Powered by vBulletin® - Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.