Page 1 of 3 123 LastLast
Results 1 to 20 of 42
  1. #1

    Default Why doesn't everyone face lather?

    What's the deal? Am I missing something? I've seen all of the You Tube videos, all the posts with instructions on how to make nice fluffy lather in a bowl. Nice peaky lather that looks just like it came out of a can. I know that it's got superior properties to the aerosol goo, that's not what I'm talking about. But I thought that one of the major advantages of traditional wet shaving was the brush. It raises the whiskers, it works the soap/cream into the beard to make it easier to cut, it helps exfoliate, the time it requires ensures that the expensive soaps and creams have time to prepare your skin and beard for the shave, the list goes on and on. But how do you gain any of these benefits, the ones that you can use to justify spending top dollar on a luxurious brush, if you're just painting some whipped cream onto your face? I really don't get it.

  2. #2
    Join Date
    Nov 2008
    Location
    Santa Rosa, Ca
    Posts
    1,241
    Images
    3

    Default

    I for one use a scuttle to make my lather and keep it warm while shaving. I do not paint the lather on my face but rather use the same motions as the face lather maker. Once I lather my face only then do I smooth it out a bit with side to side motion of the brush. Why do some use flys and some use luers? It's all fishing without bait.
    Ah come on, Just ONE more shave!

    Mark's Kitchen & Smokin' BBQ

  3. #3

    Default

    Well, I lather in a bowl as well as on my face (usually when I'm pressed for time) and find it has its advantages

    - I can control much more precisely the texture of the lather
    - I can get much more lather out of the same amount of cream / soap (especially useful for me since I shave my head and face - if I face lather I usually need to reload the brush once more before shaving my head)
    - Using a scuttle or a bowl of hot water underneath keeps the lather warm through all passes

    But in the end, once the lather is ready, I don't just paint it on my face, but use the same technique as face lathering so I still get the benefit!

  4. #4
    Join Date
    Mar 2009
    Location
    Fairfield, CT
    Posts
    260

    Default

    1+ I use a scuttle also, to keep the lather nice and warm, but I use the brush to work the lather into my beard and set up the whiskers.
    Happy Shaving!:biggrin:

    Ira

  5. #5

    Default

    I find it much easier to adjust the amount of water needed in a bowl rather than on my face.

  6. #6
    Join Date
    Jan 2009
    Location
    Pawtucket, RI
    Posts
    712

    Default

    I find it easier to make 3-4 passes worth of lather in a bowl rather than on my face. However, once I've gotten the water ratio where I want it, I continue to work the lather on my face for another 1-2 minutes before shaving.
    Jesse

  7. #7
    Join Date
    Dec 2009
    Location
    Palm Springs
    Posts
    229

    Default

    Quote Originally Posted by NRK View Post
    What's the deal? Am I missing something? I've seen all of the You Tube videos, all the posts with instructions on how to make nice fluffy lather in a bowl. Nice peaky lather that looks just like it came out of a can. I know that it's got superior properties to the aerosol goo, that's not what I'm talking about. But I thought that one of the major advantages of traditional wet shaving was the brush. It raises the whiskers, it works the soap/cream into the beard to make it easier to cut, it helps exfoliate, the time it requires ensures that the expensive soaps and creams have time to prepare your skin and beard for the shave, the list goes on and on. But how do you gain any of these benefits, the ones that you can use to justify spending top dollar on a luxurious brush, if you're just painting some whipped cream onto your face? I really don't get it.
    Agree 100%

  8. #8

    Default

    Quote Originally Posted by NRK View Post
    What's the deal? Am I missing something? I've seen all of the You Tube videos, all the posts with instructions on how to make nice fluffy lather in a bowl. Nice peaky lather that looks just like it came out of a can. I know that it's got superior properties to the aerosol goo, that's not what I'm talking about. But I thought that one of the major advantages of traditional wet shaving was the brush. It raises the whiskers, it works the soap/cream into the beard to make it easier to cut, it helps exfoliate, the time it requires ensures that the expensive soaps and creams have time to prepare your skin and beard for the shave, the list goes on and on. But how do you gain any of these benefits, the ones that you can use to justify spending top dollar on a luxurious brush, if you're just painting some whipped cream onto your face? I really don't get it.
    I face lather with a boar brush

  9. #9
    Join Date
    Jul 2009
    Location
    Holstebro, Denmark
    Posts
    6,526

    Default

    I face lather with boar or badger - depending on the mood.
    I bowl lather with boar or badger - depending on the mood.
    I lather in a scuttle with boar or badger - depending on the mood.

    I get what you're saying, I just don't understand why it has to be one or the other.
    I like having options, and this goes for brushes, razors, blades, soaps, creams and aftershaves as well.
    You could stick to 1 brush, 1 razor, 1 blade, 1 soap and 1 aftershave - but life would just be so much more boring (to me).

    It is a matter of YMMV
    Søren o;)

  10. #10

    Default

    Quote Originally Posted by Wil Dorenbos View Post
    I face lather with a boar brush
    Same here. All that exfoliation has done wonders for my complexion!

  11. #11

    Default

    Quote Originally Posted by Laser View Post
    1+ I use a scuttle also, to keep the lather nice and warm, but I use the brush to work the lather into my beard and set up the whiskers.
    Same for me. I like having a warm lather straight from the scuttle but if I want more protection in certain areas (e.g. Adam's apple), I can make a few extra whips here or there straight on the ol' canvas.
    [B]Fixed[/B]
    [B]Razor:[/B] Merkur - HD 34C
    [B]Brush:[/B] Vulfix - Pure Badger 1000A (for now)
    [B]Scuttle:[/B] Bonnyman Moss

    [B]Currently using (a.k.a. my quest to try everything)[/B]
    [B]Blade:[/B] Astra - Superior Platinum
    [B]Cream:[/B] Fraser - Oriental Spice
    [B]Aftershave:[/B] Lustray - Spice

  12. #12
    Join Date
    Nov 2009
    Location
    Lake Wylie, SC
    Posts
    4,361

    Default

    Quote Originally Posted by Laser View Post
    1+ I use a scuttle also, to keep the lather nice and warm, but I use the brush to work the lather into my beard and set up the whiskers.
    +2. I do exactly the same thing.
    John

  13. #13
    Join Date
    Dec 2009
    Location
    Norway, somewhere in the west
    Posts
    679

    Default

    What's the deal? Am I missing something? I've seen all of the You Tube videos, all the posts with instructions on how to make nice fluffy lather in a bowl. Nice peaky lather that looks just like it came out of a can. I know that it's got superior properties to the aerosol goo, that's not what I'm talking about. But I thought that one of the major advantages of traditional wet shaving was the brush. It raises the whiskers, it works the soap/cream into the beard to make it easier to cut, it helps exfoliate, the time it requires ensures that the expensive soaps and creams have time to prepare your skin and beard for the shave, the list goes on and on. But how do you gain any of these benefits, the ones that you can use to justify spending top dollar on a luxurious brush, if you're just painting some whipped cream onto your face? I really don't get it.
    As some people here have said, we don't brush it on our face once it's right. We, at least I, use circular motions to work the lather into our face, which gives us the benefits from face lather (as far as exfoliation and preparing the beard goes). I do this for about a minute (it's really quite comfortable, especially if the lather is hot!) before I evenly distribute my lathery goodness over my face. When I paint brush the lather over my face, I can sort of feel that the lather is moist and that is has a low friction. I do get some irritation, but I've decided that it's my technique that's the problem (angle/pressure).

    However, I imagine that either Kyle's prep or any other prep out there prepares the beard pretty good. Should should exclude the circular motions with the brush from your ritual, though. Gets them hairs up at 90 degrees and soft as a makaroni

    -Compaq-
    - Anders

    "I can resist anything, except temptations."

  14. #14
    Join Date
    Aug 2006
    Location
    The Badger State AGAIN
    Posts
    14,902
    Images
    1

    Default

    Quote Originally Posted by shm View Post
    I face lather with boar or badger - depending on the mood.
    I bowl lather with boar or badger - depending on the mood.
    I lather in a scuttle with boar or badger - depending on the mood.

    I get what you're saying, I just don't understand why it has to be one or the other.
    I like having options, and this goes for brushes, razors, blades, soaps, creams and aftershaves as well.
    You could stick to 1 brush, 1 razor, 1 blade, 1 soap and 1 aftershave - but life would just be so much more boring (to me).

    It is a matter of YMMV
    That pretty much sums it up. I change my routine from time to time, depending on mood or circumstances. When I shower and shave at a truck stop I usually shave before my shower, because I like to wrap a warm dry towel around my waist when I shave and because the steam hasn't fogged the mirror up yet. At home, I go back & forth on this.
    Relax...Take it easy...Enjoy the lather.

    Dennis,


    Steward in the General Shaving Discussion Forum

  15. #15
    Join Date
    Aug 2009
    Location
    Chattanooga, TN
    Posts
    275

    Default

    Quote Originally Posted by Compaq View Post
    As some people here have said, we don't brush it on our face once it's right. We, at least I, use circular motions to work the lather into our face, which gives us the benefits from face lather (as far as exfoliation and preparing the beard goes). I do this for about a minute (it's really quite comfortable, especially if the lather is hot!) before I evenly distribute my lathery goodness over my face.
    To me, this is just adding an extra step (and extra cleaning) to the process. I facelather, and this process is pretty close to my process except I work the lather on my face for closer to 2 minutes prior to the first pass. It takes less time on passes 2 and 3. Anyways, YMMV, but I'm a very happy face latherer.
    Charter member of the TLC (Tallow Loving Coalition).

  16. #16
    Join Date
    Aug 2009
    Location
    Murcia-Southeast of Spain
    Posts
    1,128

    Default

    Quote Originally Posted by skiddyrow View Post
    Well, I lather in a bowl as well as on my face (usually when I'm pressed for time) and find it has its advantages

    - I can control much more precisely the texture of the lather
    - I can get much more lather out of the same amount of cream / soap (especially useful for me since I shave my head and face - if I face lather I usually need to reload the brush once more before shaving my head)
    - Using a scuttle or a bowl of hot water underneath keeps the lather warm through all passes

    But in the end, once the lather is ready, I don't just paint it on my face, but use the same technique as face lathering so I still get the benefit!
    +1 I do the same thing and really works well to my skin.

  17. #17
    Join Date
    Jul 2009
    Location
    Morris IL
    Posts
    222

    Default

    I started with bowl lathering and I never got what I thought was "great" lather. Once I switched over to face lathering I got great lather every time. I blame it on my hard water, since the bowl created lather would dry out super fast, with no slickness, even if the lather was over watered.
    If you find yourself in a fair fight your tactics are questionable.

  18. #18

    Default

    I started face lathering when I got my first shave stick. With my creams though I use a mug and work the lather in to my beard with the brush.
    I don't own any stocks or bonds. All my money is tied up in debt. George Carlin :lol:

  19. #19
    Join Date
    Jan 2009
    Location
    Manteca,CA
    Posts
    924
    Images
    21

    Default

    I float a bowl in a sink of hot water.
    Theres nothing like grabbing that brush out of the bowl to lather up for the 2nd pass.
    That warm lather just adds so much to the shave.
    Alan
    No electrons were harmed in the transmission of this message

  20. #20
    Join Date
    Feb 2007
    Location
    Austin, TX
    Posts
    1,452
    Images
    3

    Default

    I've gone back and forth and for me, I get my best lather and best shaves when I build my lather in a bowl. Face lathering just doesn't cut it for me. It really doesn't matter what you use, bowl or face. Use what works for you. EVERYONE should try face lathering and building lather in a bowl.
    Gafer

 

 

Similar Threads

  1. I will now END the face-lather/bowl-lather argument ...Please see post #24
    By Slash McCoy in forum General Shaving Discussion
    Replies: 41
    Last Post: 10-05-2012, 04:51 PM
  2. face prep: lather on face= How long?
    By jsj_297 in forum General Shaving Discussion
    Replies: 38
    Last Post: 05-11-2011, 08:50 PM
  3. Replies: 7
    Last Post: 03-03-2009, 02:59 PM
  4. Bowl Lather/Face Lather = What Brush?
    By john parker in forum Shaving Brushes
    Replies: 3
    Last Post: 02-14-2009, 11:14 AM
  5. My ideal HOT lather bowl doesn't float.
    By 2bits in forum Shaving Soaps
    Replies: 3
    Last Post: 01-07-2008, 03:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •