Bob's Razor Works- New Items

[ESTEBE VERDE]

Here's the latest for the work shop.
I've been getting quite a few order for wood composite handle.
....
And an Ebony Set with Fluted Knobs.
https://lh4.googleusercontent.com/_6P_7INYCblE/TVR8V0kktQI/AAAAAAAACfs/ItbAsqR61Pg/s720/Feb%2010%20008.jpg


Bob,

How long are these from tip to tip??? :thumbup:

[cooncatbob]

Bob,

How long are these from tip to tip??? :thumbup:

4 1/2 on the razor handle, not counting the head and 5 for the brush handle.

[ESTEBE VERDE]

4 1/2 on the razor handle, not counting the head and 5 for the brush handle.


Awesome!

[cooncatbob]

Usually guys want my longer handles, but this client sent me his Barber Pole 38c and want it cut down to HD size.
https://lh6.googleusercontent.com/_6P_7INYCblE/TWVGv5MdekI/AAAAAAAACiQ/HpnH9VfWxwI/s720/38c%20003.jpg

[mattface]

Personally I dig the traditional 3.25"ish handles in the thicker hevier widths. My hands are not small, and before i started using them I wouldn'ta thunk it, but they fit very comfortably in my hand, and give just the right sort of balance and grip for the no pressure shave.

Out of curiosity, what's the difference between your Bull Mastiff, and Bull Mastiff Deluxe handles? I just picked up a deluxe of the BST, but I can't really tell the difference between that and the Bull Mastiff from the pictures.

[cooncatbob]

Personally I dig the traditional 3.25"ish handles in the thicker hevier widths. My hands are not small, and before i started using them I wouldn'ta thunk it, but they fit very comfortably in my hand, and give just the right sort of balance and grip for the no pressure shave.

Out of curiosity, what's the difference between your Bull Mastiff, and Bull Mastiff Deluxe handles? I just picked up a deluxe of the BST, but I can't really tell the difference between that and the Bull Mastiff from the pictures.

Deluxe handles have cut long grooves on the barrel.
Regular handle.
https://lh5.googleusercontent.com/_6P_7INYCblE/SojfMYajNjI/AAAAAAAACgQ/haquCRa_nDs/s720/bm-3.jpg
Deluxe handle
https://lh3.googleusercontent.com/_6P_7INYCblE/Swwcd_APpZI/AAAAAAAACbE/6BIeBIQaXpE/s720/BM%20Deluxe%20003.jpg

[mattface]

Deluxe handles have cut long grooves on the barrel.


Oh, so I guess the one I got is not the deluxe after all. :001_huh:

http://badgerandblade.com/vb/attachment.php?attachmentid=147697&stc=1&d=1298407558

Ah well. it's very pretty none the less. :001_smile

[MajorBurnz]

Yeah, I was going to point that out on the FS thread, but the pics were clear, and the handles are great (as all Bob's work is).....so it really didn't matter.

[ESTEBE VERDE]

Bob,

What materials do you use? Do you ever use use stainless?

[mattface]

Yeah, I was going to point that out on the FS thread, but the pics were clear, and the handles are great (as all Bob's work is).....so it really didn't matter.

Indeed, I was purchasing it more based upon the picture than on the name, and I was happy, but jgkeegan is a standup guy, and refunded me $5 which is the difference in what Bob charges for the Deluxe handle, so now I'm even $5 happier with my purchase, AND I know what to call it. :P

Well actually... I'm not sure what to call it really... Maybe Spike?

http://lh6.ggpht.com/_rhCtHYLiamQ/Sl3ao3z1K8I/AAAAAAAAErg/tr0kGWc3czI/spike_and_chester.jpg

[cooncatbob]

Bob,

What materials do you use? Do you ever use use stainless?

Nickel plated brass.
No.

[aldesso]

Just wanted to post my newly acquired BRW razor. I did order it with a new head but it was for another razor ... I absolutely love the balance ... Thanks again:thumbup:

http://www.aldesso.com/images/SOTD_aldesso_003.jpg

[reyrascon]

Bob, first of all, man those are some fine looking razors!!! Do you strictly do three piece razors? Or do you do two piece as well?

[cooncatbob]

Bob, first of all, man those are some fine looking razors!!! Do you strictly do three piece razors? Or do you do two piece as well?

What do you mean by 2 piece?
I make custom handles for Merkur HDs and the Progress, but the client has to provide the donor razor.

[cooncatbob]

Here's a Bronze Razor that I've Patina ed with Ferric Nitrate.
https://lh6.googleusercontent.com/_6P_7INYCblE/TXZy1Tye-WI/AAAAAAAACjA/wQiLdcpojNw/s576/Bronze%20Imp.jpg

[reyrascon]

What do you mean by 2 piece?
I make custom handles for Merkur HDs and the Progress, but the client has to provide the donor razor.

Sorry, I did mean two piece like a Merkur HD. Thanks for the info!

[Cheesehead Transplant]

I love my Bull Mastiff! I've had 6 out of 6 wonderful shaves with it so far. Thank you, Bob. You do wonderful work.

[BentonClay]

Here's a Bronze Razor that I've Patina ed with Ferric Nitrate.
https://lh6.googleusercontent.com/_6P_7INYCblE/TXZy1Tye-WI/AAAAAAAACjA/wQiLdcpojNw/s576/Bronze%20Imp.jpg

Wow Bob - that look is right up my alley!

[Mac37]

Bob, love the ferric nitrate! You have any pictures from other angles? Did you put any king of clear finish over it or is it "natural"?

[cooncatbob]

Bob, love the ferric nitrate! You have any pictures from other angles? Did you put any king of clear finish over it or is it "natural"?

No that razor has been sent to it new home in Sweden.
No clear coat, want to have the finish naturally age.
I also did my bronze razor but I'm having trouble getting the solid bronze handle as dark as the plated head.
I'm thinking of trying Ferric Nitrate/Ferric Chloride mix.
You can get the chemicals here.
http://www.sculptnouveau.com/index.cfm
and here
http://www.sciencecompany.com/patinas/patinaformulas.htm#1
There's also some video on you Tube.
http://www.youtube.com/view_play_list?p=AFF2359421782D8B
I just put the parts in the oven on a paper towel on a cookie sheet then spritz them.
Most of these chemical will work on copper and brass too.

[cooncatbob]

Sometimes you just get lucky, when I went to my sources studio looking for a piece of Amboyna Burl I was lucky that he had 1 piece left from his last shipment.
He ran the blank through his planer exposing the grain and we could see that it had solid eyes form end to end.
I decide that to get the best use out of this blank with no waste I'd turn 2 long handles end to end.
Now this can be kinda scary as Burl wood is all twisty grain without the long grain running from end to end that a normal piece of wood has.
This blank was 11 inches long and I was concerned with it snapping in half due to a defect in the grain structure.
It was a bitch to turn, I had to support the backside with my hand as I turned it, but it was without a doubt the nicest piece of Burl I'd ever turned.
I sent the client some pictures giving him the choice of which handle he wanted, he sent a reply that he'd like to buy both handle.
I was going to offer the 2nd handle here but alas they're both sold along with a Burl tipped Bull Mastiff handle.
https://lh6.googleusercontent.com/_6P_7INYCblE/TX5FHBNztdI/AAAAAAAACj0/Q0FN6ok26rE/s640/Burl%20Set%20004.jpg

[ESTEBE VERDE]

Sometimes you just get lucky, when I went to my sources studio looking for a piece of Amboyna Burl I was lucky that he had 1 piece left from his last shipment.
He ran the blank through his planer exposing the grain and we could see that it had solid eyes form end to end.
I decide that to get the best use out of this blank with no waste I'd turn 2 long handles end to end.
Now this can be kinda scary as Burl wood is all twisty grain without the long grain running from end to end that a normal piece of wood has.
This blank was 11 inches long and I was concerned with it snapping in half due to a defect in the grain structure.
It was a bitch to turn, I had to support the backside with my hand as I turned it, but it was without a doubt the nicest piece of Burl I'd ever turned.
I sent the client some pictures giving him the choice of which handle he wanted, he sent a reply that he'd like to buy both handle.
I was going to offer the 2nd handle here but alas they're both sold along with a Burl tipped Bull Mastiff handle.
https://lh6.googleusercontent.com/_6P_7INYCblE/TX5FHBNztdI/AAAAAAAACj0/Q0FN6ok26rE/s640/Burl%20Set%20004.jpg

GORGEOUS!!!!! :thumbup:

[binowatch]

Just rec'd my razor from Bob--magnificent! Beautifully machined, fitted and finished! Great advice on selection-tried it this am-BBS in two passes and touchup, once you adjust to the weight it was trauma free! Thank you very much!

[Big Dog]

Just received 6 NOS English Slim Twist razor from my source in the Netherlands.
http://lh6.ggpht.com/_6P_7INYCblE/TKO2ubdpmmI/AAAAAAAACUI/PuZA9Yzujp0/s640/9-28-10%20007.jpg
So now I'll be able to once again take orders for BM Slim TTOs.
http://lh4.ggpht.com/_6P_7INYCblE/TL39oTtVf-I/AAAAAAAACbc/orIohYSRJ2U/s720/Knurled%20TTO%20002.jpg

Hi Bob,

I just got a Slim Twist and I posted a question about getting a different handle.

http://badgerandblade.com/vb/showthread.php?t=201061

Now I see that you can transplant the head onto another handle I would be interested to see what my options are. I don't necessarily want another long handle on it. Something similar to the length and weight of a Red Tip would be cool. Thanks.

[cooncatbob]

Hi Bob,

I just got a Slim Twist and I posted a question about getting a different handle.

http://badgerandblade.com/vb/showthread.php?t=201061

Now I see that you can transplant the head onto another handle I would be interested to see what my options are. I don't necessarily want another long handle on it. Something similar to the length and weight of a Red Tip would be cool. Thanks.

You need to send me a PM, I don't do business on the opened forum.
I can do the handle any length, the diameter needs to be 7/16ths to match the TTO knob.
Unless your razor is in excellent condition you'd probably be better off using one of my NOS heads.
Bob.

[mandoman]

those look nice :thumbup1:

[Big Dog]

Bob,
Thanks for responding. I will send you a PM.

[poonjaji]

Below is an Ever-Ready lather catcher Bob replated for me, and three custom handles he has made over the last few months. (The nickel plated one arrived today.) Bob, thanks for all of your work!!! :thumbup:

http://i1189.photobucket.com/albums/z423/poonjaji/NewToys005.jpg
http://i1189.photobucket.com/albums/z423/poonjaji/NewToys007.jpg

Wood/burl handles made a number of months ago for the same razor.
http://i1189.photobucket.com/albums/z423/poonjaji/NewToys001.jpg
http://i1189.photobucket.com/albums/z423/poonjaji/NewToys002.jpg
http://i1189.photobucket.com/albums/z423/poonjaji/NewToys004.jpg

[Doodi1]

Beautiful handles for the lather catchers. I have to ask Bob for a couple for mine also. I want one in brass but 25% bigger.

[surpera1]

i cant wait to get mine ! i ordered a fluted with a long comb NEW head - i am sooo drooling over these pix

[Sir_Eider]

Hi!

I have been checking your excellent razor handles and I was thinking... If I'll want a Merkur Progress with Bull Mastiff handle will you need the entire razor or could be possible to do it with only Progress head? Sell Merkur the heads?

Thanks

[surpera1]

just got in my fluted with NEW long comb head - wow - beautiful work bob - i cant wait for you to get back from your vacation so i can order another one ! fast turnaround from order time - fast shipping - awesome product - i can highly recommend bobs razor works to anyone here - and now - time to go shave with it - hahahahahahaha

[MASSDRIVER]

It is the finest razor available in my opinion. I had Bob make me the fluted handle at 4 1/8" long, and just the heft is awesome.
You will enjoy it, I'm sure.

Brent.

[surpera1]

well - loaded up a new wilkinson blade in it and had a most excellent irritation free shave - no knicks or weepers - and very clean and close - wow - my best DE shave to date - this is the razor gillette should have made - i thought my little short comb was good - this blows it out of the water - now i need a case for it - anyone here have a spare one ? and oh yeah - bob is gonna get some more business from me for sure

[jbaca]

I have the XL deluxe handle on a new long comb. It shaves on auto-pilot,seemingly anyways

[mattface]

well - loaded up a new wilkinson blade in it and had a most excellent irritation free shave - no knicks or weepers - and very clean and close - wow - my best DE shave to date - this is the razor gillette should have made - i thought my little short comb was good - this blows it out of the water - now i need a case for it - anyone here have a spare one ? and oh yeah - bob is gonna get some more business from me for sure

I really like the old Hoffritz cases.

http://farm6.static.flickr.com/5173/5477374224_38ec13f067_z.jpg (http://www.flickr.com/photos/happytriggerfinger/5477374224/)
Bob's Razorworks Bull Mastiff in Hoffritz case (http://www.flickr.com/photos/happytriggerfinger/5477374224/) by mattface (http://www.flickr.com/people/happytriggerfinger/), on Flickr

[surpera1]

thats perfect ! now to find one

[JD.E.]

At BRW we don't copy, we innovate and improve.
Keeping with that I have some new products and improvements.
First off is a 2 piece travel version of my Improved handle, this ones nickel plated brass and when it's screwed together it's impossible to see where it's joined together.

2nd I had discontinued making my TTO razor due to the hit or miss quality of the heads I was able to procure, well I recently did some horse trading with a fellow in the Netherlands and scored some NOS T1000 Slim Twist which I'm using on my TTOs.

Here's are pictures of 2 razors that I've made before they're nickel plated.
http://lh5.ggpht.com/_6P_7INYCblE/TGwTNfRjffI/AAAAAAAACN0/uSToHWJdP98/s720/Aug%20eightteen%20007.jpg

The razor pictured above, this looks a bit slimmer than the usual BM. Is this true? If so, do you happen to know the weight of the handle without the slim twist head?

I love your razors, but I think any of the BM handles would be a bit too heavy for my tastes.

[Doodi1]

My turn for some razor Porn. These are my treasured pieces.
GEM Damaskeene with the Improved handle, The Bull Mastiff with the short OC Gillette New head, the Fluted handle with a Long OC Gillette New head, and finally my Merkur Progress with a Deluxe Bull Mastiff handle.

For comparison, I have also included a picture of my Mergress XL next to the one Bob Modified for me.:tongue_sm

[ziplepingouin]

My turn for some razor Porn. These are my treasured pieces.
GEM Damaskeene with the Improved handle, The Bull Mastiff with the short OC Gillette New head, the Fluted handle with a Long OC Gillette New head, and finally my Merkur Progress with a Deluxe Bull Mastiff handle.

For comparison, I have also included a picture of my Mergress XL next to the one Bob Modified for me.:tongue_sm

Wow your customized Progress looks amazing!:w00t:

[surpera1]

i cant wait to order some more of your stuff bob - you should get a stamp made and sign your work - ever think about making some cases to go with them ?

[omigosh]

Is there a trick to ordering from this guy? I PM'd and e-mailed him a few days ago and haven't got a response.

[connelly108]

I got an email about a week ago saying he was going on a road trip.

[omigosh]

OK, cool! I'll wait then! Thanks.

[MajorBurnz]

Wow your customized Progress looks amazing!:w00t:

You like customized Progress razors? How about this:

http://i295.photobucket.com/albums/mm128/yohannrjm/IMG_2516.jpg

http://i295.photobucket.com/albums/mm128/yohannrjm/IMG_2519.jpg

http://i295.photobucket.com/albums/mm128/yohannrjm/IMG_2517.jpg

Bob converted a vintage Progress into this for me a few months ago. Excellent shaver, and very heavy.

[surpera1]

yeah - i wanna order another one from him also - we will just have to wait - dagnabbit - hahahaahahahah - after i got my hands on that first one he made for me - it was all over - wow

[bakerbarber]

Oh well now you're just showing off! :biggrin1:

I hope I can keep from looking at this thread and avoid temptation... :bored:

[ziplepingouin]

You like customized Progress razors? How about this:

http://i295.photobucket.com/albums/mm128/yohannrjm/IMG_2516.jpg

http://i295.photobucket.com/albums/mm128/yohannrjm/IMG_2519.jpg

http://i295.photobucket.com/albums/mm128/yohannrjm/IMG_2517.jpg

Bob converted a vintage Progress into this for me a few months ago. Excellent shaver, and very heavy.

Great pics! thanks for your post! I'll drop a PM to Bob, In fact I just received my Futur, not even tried it yet, and already thinking to sell it for a modified Progress...:blink:...

[Alucard73]

Is there a trick to ordering from this guy? I PM'd and e-mailed him a few days ago and haven't got a response.

I also got an email saying he was going on road trip and would be out.

[ziplepingouin]

Btw MajorBurnz , does your progress have the alignment of the adjusment knob issue solved? Thx!

[MajorBurnz]

The alignment issue is one that exists on unmodified Progress razors.

Since Bob removes the handle from the Progress and replaces it with his own, there are no alignment issues. He draws the mark on the barrel of the handle to align with one of the red ones on the knob.

[ziplepingouin]

Thanks for your reply! I think I'm gonna go this way...:thumbup1:

[Bushranger]

Stella & creative work with the (originally cheap looking) Progress, Bob. Are knurl patterns and handle material restricted to this one design? I see the images in the above posts found here (http://badgerandblade.com/vb/showthread.php?t=174969&highlight=bob%27s+progress) and wondered Bob if you already cater for Gillette adjustables such as the SLIM and FatBoy?

[whitero]

I have a bullmastiff with gilette new head from bob and it is dream to use very good quality and fast service will be ordering again soon

[huck1680]

Road trip eh? That would explain why he hasn't responded to several emails from me wanting to buy a handle

[dalecooper51]

Road trip eh? That would explain why he hasn't responded to several emails from me wanting to buy a handle

He will get back to you when he returns.

I have sent an email also.

[WPD111]

You like customized Progress razors? How about this:

http://i295.photobucket.com/albums/mm128/yohannrjm/IMG_2516.jpg

http://i295.photobucket.com/albums/mm128/yohannrjm/IMG_2519.jpg

http://i295.photobucket.com/albums/mm128/yohannrjm/IMG_2517.jpg

Bob converted a vintage Progress into this for me a few months ago. Excellent shaver, and very heavy.

Yohann, that's one sweet looking razor . the craftsmanship is typical for Bob's quality work:biggrin1:I'm very jealous .....

[WPD111]

I'm contemplating throwing a curve at Bob and asking him to modify my Futur ..
No doubt he will work wonders:001_rolle

[cooncatbob]

While Bob's Razor Works has made money it hasn't make enough money to cover all my expenses.
I've had to cover the difference with my savings (inheritance) and finally I had to cash in my IRA.
These funds are almost exhausted and I'm going to be forced to give up on my American dream of home ownership and move.
I hope to move in with friends that will allow me to set up shop as this the only way I have of making any money since the collapse of the housing industry in Northern California.
I should know this weekend whether BRW will be able to remain in business.
I wish to thank all those who have supported my humble endeavor.
Bob.

[jbaca]

can somebody give Bob some inexpensive workspace near Carmichael Ca-Sorry to hear of this situation Bob you are a valued member and vendor here
BRW must continue

[Alucard73]

Good luck. Hopefully you can continue as you are a master of your craft...and I really need you to continue so I can get more razors. :001_smile

[MajorBurnz]

Bob -

I'm sorry to hear about your situation. I hope you're able to figure things out, so that you can make things work financially, and I hope to see BRW back in business when things are well again.

Thank you for the effort you've put into the razors you've crafted for me (and others) - you've added a lot of class to our shaving.

If a few 'commissions' will help out, I can send a few things your way.

All the best!

[cooncatbob]

can somebody give Bob some inexpensive workspace near Carmichael Ca-Sorry to hear of this situation Bob you are a valued member and vendor here
BRW must continue

Probably moving back to my home town of Concord.
The way I'm self employed would make it hard for me to even rent an apartment and that wouldn't do anyway.

[dalecooper51]

Best of luck Bob.

[bakerbarber]

Bob,

Hang in there man! You're gonna come out on top!

Sorry to hear things are rough. We're all pulling for you!

I'm going to be looking for updates to this thread. Let us know how BRW - and more importantly - how you are doing.

Best wishes man! You're a true craftsman and artist.

I hope everything gets better for all of us.

From one of your proudest customers- (although I never asked for a custom progress handle) :tongue_sm

:badger:

Have a beer and we'll figure it out.:a8:

[brucered]

While Bob's Razor Works has made money it hasn't make enough money to cover all my expenses.
I've had to cover the difference with my savings (inheritance) and finally I had to cash in my IRA.
These funds are almost exhausted and I'm going to be forced to give up on my American dream of home ownership and move.
I hope to move in with friends that will allow me to set up shop as this the only way I have of making any money since the collapse of the housing industry in Northern California.
I should know this weekend whether BRW will be able to remain in business.
I wish to thank all those who have supported my humble endeavor.
Bob.

Wowsers, sorry to hear about all that Bob. i just sent you an email on a progress/cooncated, but feel free to disregard if you are not doing any more work right now.

hope things turn around for you soon,

take care...Bruce

[Scott0079]

Bob you are a true artist and I wish you all the best, you'll be in my prayers.:thumbup1:

[surpera1]

man - we are waiting in line to buy your stuff
dont leave us

[TYdeFan05]

All the best to you, CCBob.

[spindlecone]

Sorry to hear,am an avid fan of your finely crafted razors (I have twelve of them)
I was also a casuality of the meltdown 6 yrs ago,lost it all.
Thru the grace of god I was able to come back stronger than ever.
your talent for design and the quality of your workmanship,believe it or not is in major demand to a large well heeled populace.
Is none of my Business,but I feel if you expanded your market (If possible) You would do a fantastic amt, of business.
god bless and take care.

[franz]

Bob, I'm sorry to hear this. I think your craftsmanship is absolutely stellar and it would be a shame if you were no longer able to practice it.

[Mir]

Sorry to hear this Bob.

Although I am not a customer, it was only a matter of time before I caved and surrounded myself with your beautiful work.

I hope things work out for you, please keep us in the loop mate.

[letsdisinfect]

If it helps Id be more than happy to defy my wife and finally make the Bob's Razor Works purchase I've always wanted.

[litespeedone]

Very sorry to hear about this. Wishing the best for Bob and his business.
There is a large market here, and a lot of people love Bob and his work.

E-mail inquiry sent to Bob.

[55dougie]

Bob, I pray that you bounce back and continue to provide the finest of shaving products to our small fold.... I love my 2 BRW razors and look forward to more in the future.....

Keep pushing and the wall you are facing "WILL MOVE" and let you pass thru to the other side stronger than ever..... Good Luck, Doug...:thumbup1:

[whiteweed]

I know you will be back Bob. And when you get back I will be getting one of the Tuckaway designs. Creativity and skill like yours cannot be held back. Godspeed look forward to hearing from you again.

[PanchoVilla]

Bob, I was fortunate enough to get 2 of your razors and was looking forward to a 3rd when you got back.

Whatever you do, don't give up on your craft. Let us know when things get squared away.

Good luck to you.

[huck1680]

Damn sorry to hear about this Bob. I was looking forward to a couple of your handles. Let us know how you're managing and keep us updated.

All the best

Don

[Perished]

Good luck Bob. Gentleman to deal with, and great craftmanship too. Hope it works out for you mate.

[jbaca]

I think Bob is still taking orders so email him w/ your needs and hes lookin for NEW heads so...:thumbup1:

[PanchoVilla]

I think Bob is still taking orders so email him w/ your needs and hes lookin for NEW heads so...:thumbup1:
Thanks j, keep your fingers crossed. I just e-mailed him with an order. :sad:

[California Cajun]

I enjoy looking at your site, and that's usually the first step of a purchase.

[RockyNomad]

I think Bob is still taking orders so email him w/ your needs and hes lookin for NEW heads so...:thumbup1:

He is, I just placed an order with him yesterday.

[PanchoVilla]

He is, I just placed an order with him yesterday.

I just sent him my Paypal.:thumbup:

I really do hope he is able to pull through this sooner rather than later. Nobody can say that he doesn't have a real talent here. I wish him my best.

[ssultan]

Bob, very sorry to hear about your situation. Wishing you the best of luck! Just hang in there...

[WPD111]

I have also had the privilege of owning several " Masterpiece's" from Bob
and am Hoping the best for your current situation:thumbup1:

[Doodi1]

I own 4 of Bob's masterpieces now, and was about to place an order for some handles for my Lathercatchers. Bob, I sincerely hope that you figure out a way to stay in the business. You are too good a craftsman to give this up.

[DustBow]

good luck Bob

[cooncatbob]

I'm going to be culling the little used razors in my personnel collection.
I'll post pictures later today.
First off I've got a Toggle, very nice shape, I had the toggle lever nickel plated. $100
I've got a vintage Progress (78-83) with a ivory clam shell case, this come with a Bull Mastiff style knob in addition to the stock knob.
$100.

[TYdeFan05]

I'm going to be culling the little used razors in my personnel collection.
I'll post pictures later today.
First off I've got a Toggle, very nice shape, I had the toggle lever nickel plated. $100
I've got a vintage Progress (78-83) with a ivory clam shell case, this come with a Bull Mastiff style knob in addition to the stock knob.
$100.

I'd be interested in a picture of that Progress if you ever get around to it...per our e-mail discussion the other day I'm in the market. Plus, 1983 was a pretty great year :thumbup1:

Edit: after some searching, is this it?
http://farm2.static.flickr.com/1339/1346680657_1dc36de16e.jpg

[cooncatbob]

I'd be interested in a picture of that Progress if you ever get around to it...per our e-mail discussion the other day I'm in the market. Plus, 1983 was a pretty great year :thumbup1:

I'll post some pictures when I get back from the plating shop, hour or so.
The vintage Progress is better made then the current razors, it weighs several grams more and the blade platform has less play and a more solid feel to it.
Here's an old picture from 07, slant is long gone.
http://farm2.static.flickr.com/1339/1346680657_1dc36de16e.jpg

[cooncatbob]

The Progress and the Toggle are sold.
Here I have almost mint condition Merkur HD, it would be mint except I drilled the knob and install a 5/16th rare earth magnet, this is like the magnet I use with the Bull Mastiff handle except it's larger.
This razor is being sold with a vintage ivory plastic Merkur box, these were the boxes Chessman sold his vintage slant with, far superior to the POS case Merkur uses now.
$50 and $7 for Priority Mail S&H.
https://lh6.googleusercontent.com/_6P_7INYCblE/TchR--J-gaI/AAAAAAAACpc/JpjmqtdUdUY/s640/Merkur%20HD.jpg

I also have this vintage Hoffritz Slant for $75 and $7 Priority Mail
Comes with the Chrome case and both chrome blade holders.
https://lh4.googleusercontent.com/_6P_7INYCblE/TchMKaSy-gI/AAAAAAAACpU/sGsl9Qww-tc/s640/Hofritz%20Slant.jpg

[cooncatbob]

The Hoffritz slant is sold;
Still have the HD.
https://lh5.googleusercontent.com/_6P_7INYCblE/TciY70eR71I/AAAAAAAACp4/OvWgw03Yfn8/s640/Merkur%20HD%20001.jpg

[dannymayo]

Bob,

Sorry to hear about your current situation. You're a true craftsman and I hope that you're back in business soon.

[cooncatbob]

Bob,

Sorry to hear about your current situation. You're a true craftsman and I hope that you're back in business soon.

I'm still in business, got to eat.
I've got 5 orders at the plating shop and 29 I haven't started yet, just got some bar stock in today and will be making chips tomorrow.

[dannymayo]

Nice to hear that you're still operating, I'll shoot you a PM. :001_cool:

[cooncatbob]

I had a unexpected and sudden death in the family last Friday.
I'm going to start taking orders again but I'm running a month behind.

[TYdeFan05]

I had a unexpected and sudden death in the family last Friday.
I'm going to start taking orders again but I'm running a month behind.

Bob,

First of all: very sorry for your loss, but I'm glad to see you're back at your great work. Sometimes a return to the familiar can help calm the nerves.

As a side thought:
A lot of folks worry (obsess) about the different grip options with the 2009 Muhle/EJ shaving head and whether each one is too slippery. Have you ever, or would you consider making a knurled style handle threaded to receive those? Sorry if this is already offered and I've missed it. It just sounds like something people might appreciate as an option, especially since the heads are also offered individually.

[Kevan]

Bob,

First of all: very sorry for your loss, but I'm glad to see you're back at your great work. Sometimes a return to the familiar can help calm the nerves.

As a side thought:
A lot of folks worry (obsess) about the different grip options with the 2009 Muhle/EJ shaving head and whether each one is too slippery. Have you ever, or would you consider making a knurled style handle threaded to receive those? Sorry if this is already offered and I've missed it. It just sounds like something people might appreciate as an option, especially since the heads are also offered individually.
Any of Bob's handles would do the trick if you specify metric threads. I originally got a Bull Mastiff XL handle from Bob because the handle on my Muhle R106 was slippery. It has knurling and vertical lines.

And Bob, you have my condolences as well for your loss.

[TYdeFan05]

Any of Bob's handles would do the trick if you specify metric threads. I originally got a Bull Mastiff XL handle from Bob because the handle on my Muhle R106 was slippery. It has knurling and vertical lines.

Sounds good. Mine is somewhere on his workbench or I would have tried it myself. Thanks for the help.

[PanchoVilla]

Sounds good. Mine is somewhere on his workbench or I would have tried it myself. Thanks for the help.
Yep, I've got a metric handle for my Fatip OC head somewhere on his bench too. :biggrin1:

My condolences Bob.

[brucered]

any reviews on the Cooncat Bob Progress....not sure what it's pet name is....Cooness, Catess? now that i have the Feather, Muhle OC, Muhle Closed Comb, Gillette Slim Adjustable and a whack of others, this one is now on my Radar :tongue_sm

LINK (http://badgerandblade.com/vb/showpost.php?p=2418073&postcount=23)

http://lh6.ggpht.com/_6P_7INYCblE/S0tjoBT-fMI/AAAAAAAACJY/xTapiNjNf60/s800/Deluxe%20razors%20005.jpg

[MajorBurnz]

Bob calls it the 'Bull Progress'.

Yes, there are reviews. Look up Bull Progress in the safety forum.

Excellent modification to a great shaver (I have a Bull Progress Deluxe XL).

[cooncatbob]

Just wanted everyone to know I'm back taking orders.

[john parker]

Great!!!!

[Doodi1]

Just wanted everyone to know I'm back taking orders.

Fantastic!

[PanchoVilla]

Yep, he's taking orders. Look what the mailman delivered.:biggrin1:

Thank you Bob.

http://i13.photobucket.com/albums/a255/bobniemann/6211-2-1.jpg

[ctkelly]

Seems like there are quite a few of us ordering handles for fatip heads. I elected for a ambonya burl with fluted knob for my fatip.

[PanchoVilla]

Seems like there are quite a few of us ordering handles for fatip heads. I elected for a ambonya burl with fluted knob for my fatip.

Yep, I understand Phil (Bullgoose) went through those Fatips pretty quick.

Nice choice on the burl.

eta: Could you post a pic when it arrives?

[mhdena]

Email sent Bob

[Itabe]

Wow Bob, your products look awesome! I am glad to see that you have taken your passion and skills and applied it to the shaving world! The idea of an all metal knob for the progress is appealing.

[dbconlin]

Been wanting something from Bob for a while and just received my order for a handle and stand - let's just say it is outstanding work!

Here it is mounted to a Muehle head:

https://lh5.googleusercontent.com/-1VGSb6US5pU/TeqTnyBPjyI/AAAAAAAACf0/FEt6U9dJrHI/bobsrazorworks_handle.JPG

Here it is in the stand - Bob drilled the two sides of the stand (reversible) to accept the bull mastif deluxe on one side and my Muehle handle on the other. I had to provide the diameter of the Muehle handle and it didn't end up fitting quite as cleanly, which I think has to do with the design of the handle (it has two rings/bumps that are larger diameter than the rest of the handle, so it sits a little cocked instead of straight up):

https://lh5.googleusercontent.com/-qh6WLut5hMk/TeqToBDe--I/AAAAAAAACf4/H2qZnRfEe-k/s512/bobsrazorworks_stand.JPG

Looks pretty nice in the cabinet too and completely satisfies my desire for an elegant stand that fits compactly in its place (and I have no use for a brush/razor combo stand):

https://lh5.googleusercontent.com/-RQ1Tw9hUHNU/TeqTnl8kGeI/AAAAAAAACfw/eheXTh26XDE/bobsrazorworks_cabinet.JPG

Thanks Bob - excellent work!

[cooncatbob]

Want everyone to know I no longer have a back log, and order time is back to about 2 weeks.

[Alucard73]

Here are a couple of razors I sent to Bob for upgrades only he can do. One is a Gillette Single Ring and the other is a Gem Junior Bar. He is truly an artist.
http://i325.photobucket.com/albums/k398/Alucard73/cd054e34.jpg

[Doodi1]

Here are a couple of razors I sent to Bob for upgrades only he can do. One is a Gillette Single Ring and the other is a Gem Junior Bar. He is truly an artist.
http://i325.photobucket.com/albums/k398/Alucard73/cd054e34.jpg

Wow, that Jr. Bar looks great. I'M getting ready to send a few more of my razors (including the Jr. Bar's) to Bob for the handle upgrades. Alucard what type of wood do you have in those handles?

[Alucard73]

Wow, that Jr. Bar looks great. I'M getting ready to send a few more of my razors (including the Jr. Bar's) to Bob for the handle upgrades. Alucard what type of wood do you have in those handles?

It is called snakewood and I sent a piece along with the razors. I would get with him first and ask him about it because it sounds like its difficult to work with.

[Doodi1]

It is called snakewood and I sent a piece along with the razors. I would get with him first and ask him about it because it sounds like its difficult to work with.

Thanks, will make sure I have his approval on my suggestions for the handle materials. I want to know what my options are for the wooden handles. I want something that is pretty, but holds up well in the damp environment the that razor lives in.

[cooncatbob]

Here's some better pictures of my latest work.
https://lh6.googleusercontent.com/-PK1XzAaGlQM/Tfj73HgNNgI/AAAAAAAACvY/bnNyyOXhq80/s720/Snake%252520wood%252520handles%252520005.jpg
https://lh6.googleusercontent.com/-hsaBsyvrZ44/Tfj73GZ9Z7I/AAAAAAAACvU/xHunzPEYOIY/s640/Snake%252520wood%252520handles%252520004.jpg

[Alucard73]

Here's some better pictures of my latest work.
https://lh6.googleusercontent.com/-PK1XzAaGlQM/Tfj73HgNNgI/AAAAAAAACvY/bnNyyOXhq80/s720/Snake%252520wood%252520handles%252520005.jpg
https://lh6.googleusercontent.com/-hsaBsyvrZ44/Tfj73GZ9Z7I/AAAAAAAACvU/xHunzPEYOIY/s640/Snake%252520wood%252520handles%252520004.jpg
They came in today and look even better in person. Thanks a lot!

[Pigbutter]

Three shaves in with my NEW short comb Bullmastiff XL from BRW, loving it! Surprise magnet (seems like a rare earth magnet) in the handle ala Red Ring Eclipse is genius! Thanks Bob, great work!

[cooncatbob]

Got a couple of Vintage razor for sale, a black handle Super Speed and a Goodwill NEW.
The Goodwill NEW has a ball tipped handle that's cracked so I include a Fat Bar handle.
$10 each and $4 S&H.
https://lh4.googleusercontent.com/-2FW7Ys60lRk/Tf_WgJF8JwI/AAAAAAAACwY/DSm310mAvFc/s640/Extras.jpg

Also it's been slow so I made some stock, I have 2 Bull Mastiff handle and a Bull Mastiff XL Deluxe handle all with flared knobs and I have 2 Nickel Plated NEW heads with long combs available with the purchase of one of these handles.

[cooncatbob]

Here's my interpretation on the Merkur fat handle.
Mine's 4 5/8th long and 1 inch in diameter, I test shaved this handle last night and the finger groove are very comfortable and functional, they allow for several different gripping options .
https://lh6.googleusercontent.com/-9fww4k2EFaQ/ThJMp9eQagI/AAAAAAAACx4/Y3T2AJkrTQ4/s720/Fatty1.jpg

[spindlecone]

Damn,just what I need for my shattered wrist:( screws come out in two days.

[KM-instructor]

What can be said that has not already been said about Bob's work?

http://img.photobucket.com/albums/v622/shane1000m/Razors/Badger%20and%20blade%20forum/9cdd153f.jpg

[cooncatbob]

Damn,just what I need for my shattered wrist:( screws come out in two days.

It really quite comfortable to shave with , if I was making one for myself I'd probably make it slightly shorter as I shave my head.
It's got 2 1/2 inches of 1/4 inch brass rod epoxied in the handle, this gives some needed weight "46grams" and provides a secure anchor point for the spindle.

[spindlecone]

i find all your razors to be comfortable,only razors I have left,all 12 of them:)

[KM-instructor]

Here's my interpretation on the Merkur fat handle.
Mine's 4 5/8th long and 1 inch in diameter, I test shaved this handle last night and the finger groove are very comfortable and functional, they allow for several different gripping options .
https://lh6.googleusercontent.com/-9fww4k2EFaQ/ThJMp9eQagI/AAAAAAAACx4/Y3T2AJkrTQ4/s720/Fatty1.jpg

I bet that grip is comfortable too, a little avant garde for my taste but superbly done, especially that wood and Nickel fused together.

[JackRapture]

KM-Instructor,

What is the name of the razor on the bottom? That is just gorgeous.

[cooncatbob]

I bet that grip is comfortable too, a little avant garde for my taste but superbly done, especially that wood and Nickel fused together.

I turn the metal spindles on these type of handles with it attached to the wooded blank so I get a perfect transition, I then leave the spindle attach though out the turning and sanding of the wooden handle.

[KM-instructor]

KM-Instructor,
Bull mastiff.
What is the name of the razor on the bottom? That is just gorgeous.


I turn the metal spindles on these type of handles with it attached to the wooded blank so I get a perfect transition, I then leave the spindle attach though out the turning and sanding of the wooden handle.
I think it is amazing that transition from the metal to the wood, I'm assuming the same effect can be had from most materials?

[ltjaw]

Not sure why I haven't posted this before, but here is another of Bob's beautiful handles:

https://lh4.googleusercontent.com/-wVyPWHyGZ3A/Thfa-abXw4I/AAAAAAAABBg/9xre8LXg14s/s800/CCB.jpg

[benvh]

My Bull Mastiff XL arrived today and she's a real beaut! Top notch work. Thanks Bob!

Ben

[dbconlin]

KM-Instructor,

What is the name of the razor on the bottom? That is just gorgeous.

Is that a custom knob on the BM? Doesn't look like the standard one (though the pic is cut off so it is hard to tell)

Bob- is this a standard option you are offering?

[cooncatbob]

Is that a custom knob on the BM? Doesn't look like the standard one (though the pic is cut off so it is hard to tell)

Bob- is this a standard option you are offering?

I've been offering the flared knob option for about 6 months, the Burl Knob actually predates the Bull Mastiff spiral knob and name.

[BigFoot]

Here are my two latest additions.

A BullMastiff with Rosewood Knob and a Gem Jr. Head.

http://badgerandblade.com/gallery/displayimage.php?imageid=28139 (http://badgerandblade.com/gallery/showimage.php?i=28139)

http://badgerandblade.com/gallery/displayimage.php?imageid=28138 (http://badgerandblade.com/gallery/showimage.php?i=28138)

Improved HD XXl with Open Comb New Head

http://badgerandblade.com/gallery/displayimage.php?imageid=28140 (http://badgerandblade.com/gallery/showimage.php?i=28140)

The threading can be taken out of the SE and a regular DE head will then screw on that handle. Both handles are heavy making the shave aggressive, just they way I love them.

Great work as always Bob!!:001_tt1:

[cooncatbob]

Here's my take on the Merkur Fatty handle in brushed Aluminum.
https://lh6.googleusercontent.com/-Hpd9ZpOFs_c/TiXqnk5elSI/AAAAAAAAC1I/VBLAGCBvgMQ/s720/Alum%252520Fatty%252520001.jpg

[KM-instructor]

Here's my take on the Merkur Fatty handle in brushed Aluminum.
https://lh6.googleusercontent.com/-Hpd9ZpOFs_c/TiXqnk5elSI/AAAAAAAAC1I/VBLAGCBvgMQ/s720/Alum%252520Fatty%252520001.jpg

Holy sh*t, that Goodfella has major backup.

[cooncatbob]

Good eye, that's my modified Goodfella head, it was too mild so I took my dremel and opened the gap between the teeth, shaves just like an Old Type now.
I mainly use it for confirming the fit of my metric threaded handles.

[DE_Dude]

Here are my two latest additions.

A BullMastiff with Rosewood Knob and a Gem Jr. Head.

http://badgerandblade.com/gallery/displayimage.php?imageid=28139 (http://badgerandblade.com/gallery/showimage.php?i=28139)

http://badgerandblade.com/gallery/displayimage.php?imageid=28138 (http://badgerandblade.com/gallery/showimage.php?i=28138)

Man, that thing is awesome!

[Doodi1]

Bob:
Do you have any Gillette "New" Deluxe heads? I'm going to be sending a few of my razors in for new handles, and wanted to see if I can add the Bull Mastiff Flare Tip with the "New" Deluxe head to the other handles you are going to make for me.

[cooncatbob]

Bob:
Do you have any Gillette "New" Deluxe heads? I'm going to be sending a few of my razors in for new handles, and wanted to see if I can add the Bull Mastiff Flare Tip with the "New" Deluxe head to the other handles you are going to make for me.

I almost never have NEW deluxe head, for one they're very expensive to procure and 2nd most NEW Deluxe razor are of the long stemmed variety the Tuckaways being the exception.
BTW. In my experience they shave the same as a short comb NEW.

[Doodi1]

I almost never have NEW deluxe head, for one they're very expensive to procure and 2nd most NEW Deluxe razor are of the long stemmed variety the Tuckaways being the exception.
BTW. In my experience they shave the same as a short comb NEW.

Thanks for the info Bob. Something to think about!

[BigFoot]

Man, that thing is awesome!

Thanks, it just added a whole new dimension to the SE shave. Long heavy handle, perfecto!!

[cooncatbob]

Here's my latest creation, a custom ordered Bull Mastiff XL barrel with a double ring tip and an extended flared knob with 2 bands.
https://lh6.googleusercontent.com/-7pPbDsAuXHw/Ti3PBnt6AWI/AAAAAAAAC1k/f7MrpPhx0S4/s720/Luis%252520011.jpg

[bobfarvour]

:drool::drool:

[AudioNut]

Here's my latest creation, a custom ordered Bull Mastiff XL barrel with a double ring tip and an extended flared knob with 2 bands.
https://lh6.googleusercontent.com/-7pPbDsAuXHw/Ti3PBnt6AWI/AAAAAAAAC1k/f7MrpPhx0S4/s720/Luis%252520011.jpg

Looks awesome Bob!!!

[JackRapture]

Just a beautiful razor Bob. I might just have to order another handle. You know just as a precautionary back up to my other flared knob handle :P

[KM-instructor]

Clean up on isle 5, where's me dang Kleenex?
https://lh6.googleusercontent.com/-7pPbDsAuXHw/Ti3PBnt6AWI/AAAAAAAAC1k/f7MrpPhx0S4/s720/Luis%252520011.jpg

[cooncatbob]

Here's my latest creation, a custom ordered Bull Mastiff XL barrel with a double ring tip and an extended flared knob with 2 bands.
https://lh6.googleusercontent.com/-7pPbDsAuXHw/Ti3PBnt6AWI/AAAAAAAAC1k/f7MrpPhx0S4/s720/Luis%252520011.jpg

Client who designed this variant has requested that it be called the "American Bull Mastiff" but since it 4 inches long it need to be called "American Bull Mastiff XXL"

[natchez]

Great looking stuff! I succumbed after watching this thread for a year and have finally ordered a Bull Mastiff regular length and a New long tooth head. I can't wait until it arrives!

[subzero]

My goodness that's a beautiful razor. Excellent work as always Bob. Can't wait for my order to get here as well.

[BigFoot]

Here's my latest creation, a custom ordered Bull Mastiff XL barrel with a double ring tip and an extended flared knob with 2 bands.
https://lh6.googleusercontent.com/-7pPbDsAuXHw/Ti3PBnt6AWI/AAAAAAAAC1k/f7MrpPhx0S4/s720/Luis%252520011.jpg

It appears I will be ordering another handle soon. Stop....Bob.....Stop.

[ackvil]

Bob, you do incredibly beautiful work. Each one is a masterpiece.

[cooncatbob]

Here's my latest work.
https://lh4.googleusercontent.com/-B0g01W29ac0/TjcPi6x9osI/AAAAAAAAC3I/eARPnHyj1mA/s720/Todd%252520014.jpg
https://lh5.googleusercontent.com/-ILycyjBhRKE/TjcPcxgO_mI/AAAAAAAAC3A/zVeYC3CZhco/s640/Todd%252520011.jpg
https://lh6.googleusercontent.com/-dVYNPQ_YTyM/TjcPgz_jjYI/AAAAAAAAC3E/ndsi5sjBMa4/s640/Todd%252520012.jpg

[brucered]

Here's my latest work.
https://lh6.googleusercontent.com/-dVYNPQ_YTyM/TjcPgz_jjYI/AAAAAAAAC3E/ndsi5sjBMa4/s640/Todd%252520012.jpg

oooooo, i like that one.......how much is this one and what are the specs (length, weight)?

[bakerbarber]

LOL= that is sweet huh!?

It's 81 grams. It's actually a Durham Duplex handle and a Gillette head.

It looks INCREDIBLE. The handle has a nice pinky rest.

Bob's Flare knobs on his 3 1/8 handles have the same balance and fit. The way people buy super long handles is surprising. The dexterity you lose on an uber long handle is significant.

I have one of Bob's shorter handles with a Stahley head on it. One of my favorites. On a longer handle it wouldn't be the same.

[cooncatbob]

oooooo, i like that one.......how much is this one and what are the specs (length, weight)?

That's the clients handle and NEW Deluxe head, when you commission 2 customs I'll send your razor out to be replated.
It actually turned out nicer then I though it would, usually old knurled handle look like crap when replated, the new plating makes all the dings in the knurling stand out and there's no practical way to refurbish the knurling.

[brucered]

That's the clients handle and NEW Deluxe head, when you commission 2 customs I'll send your razor out to be replated.
It actually turned out nicer then I though it would, usually old knurled handle look like crap when replated, the new plating makes all the dings in the knurling stand out and there's no practical way to refurbish the knurling.

thanks for the info bob & baker.....i think it's my new favorite cooncat :001_wub:

[MajorBurnz]

LOL= that is sweet huh!?

It's 81 grams. It's actually a Durham Duplex handle and a Gillette head.

It looks INCREDIBLE. The handle has a nice pinky rest.

Bob's Flare knobs on his 3 1/8 handles have the same balance and fit. The way people buy super long handles is surprising. The dexterity you lose on an uber long handle is significant.

I have one of Bob's shorter handles with a Stahley head on it. One of my favorites. On a longer handle it wouldn't be the same.

Agreed about the issues with very long handles. I have made this mistake myself, and regretted it. The 3.25-3.5" handles are the easiest to handle around the face.

The extra length of the long handles coupled with the weight increase does lead to some sluggishness, and also discomfort while shaving. It's like trying to shave with a razor head attached to a 2 lb barbell :lol: - not conducive to dexterity!

Of course, that being said, this is an area of personal preference.

[Doodi1]

Agreed about the issues with very long handles. I have made this mistake myself, and regretted it. The 3.25-3.5" handles are the easiest to handle around the face.

The extra length of the long handles coupled with the weight increase does lead to some sluggishness, and also discomfort while shaving. It's like trying to shave with a razor head attached to a 2 lb barbell :lol: - not conducive to dexterity!

Of course, that being said, this is an area of personal preference.

100% Agreed. Sweet spot for me is the 3 inch to the 3.25 inch overall length of handle.

[cooncatbob]

For me the sweet spot is 3 1/8th to 3 1/4 the exception being the long handle super adjustable.
But when a client wants a 4 inch handle even after I tell them with head it's going to weigh 130 that's what I give them.

[Doodi1]

For me the sweet spot is 3 1/8th to 3 1/4 the exception being the long handle super adjustable.
But when a client wants a 4 inch handle even after I tell them with head it's going to weigh 130 that's what I give them.

Perfect Bob, Please make sure that the handles of my LC's fall in the same ranges of size.:001_smile
Harry

[AudioNut]

LOL= that is sweet huh!?
The dexterity you lose on an uber long handle is significant.

I agree. However, I am the proud owner of the American Bull Mastiff XXL and while you lose some dexterity, the feel of the handle is just fantastic. Paired with an Old Type Head, I find I am using it for when I can enjoy my shave and don't have to rush. For rush jobs, I use a notched 1940's super speed and that seems to work fine but the shave I get with my American Bull Mastiff XXL is just awesome. That said, I want to eventually order a regular sized one. :001_tt1:

[JonM]

Here's my latest work.
https://lh6.googleusercontent.com/-dVYNPQ_YTyM/TjcPgz_jjYI/AAAAAAAAC3E/ndsi5sjBMa4/s640/Todd%252520012.jpg

Would you be able to replicate something similar? If so, how much would it cost with a NEW style head? This razor is just elegant. I'm sure the orders would pile in for these.

[cooncatbob]

Would you be able to replicate something similar? If so, how much would it cost with a NEW style head? This razor is just elegant. I'm sure the orders would pile in for these.

I prefer to build my own designs and that keeps me busy.

[bakerbarber]

I used the newly made custom New Improved to shave my head twice since receiving it. It's really perfect for the job and is a joy to get the back of my head. I always had trouble with a DE on the back of my neck and around my ears. This razor is long enough to hold above and behind my head, which is hard enough to begin with. It's also exquisitely balanced without being too heavy.

I was concerned it may be too long at first, but in using it I have no trouble maneuvering about and getting all the touch up and detail spots. Really, the balance is amazing.

As always the finish is fabulous with superb attention to detail.

[cooncatbob]

Here's something a little different, Spec by the client it has a Bronze barrel with a nickle double ring spindle and a double banded flared knob.
https://lh4.googleusercontent.com/-9p25jcv2CXo/TkMoOuE-GhI/AAAAAAAAC4U/MSPqc_ey_j0/s720/Yohann%252520004.jpg

[luvmysuper]

Here's something a little different, Spec by the client it has a Bronze barrel with a nickle double ring spindle and a double banded flared knob.
https://lh4.googleusercontent.com/-9p25jcv2CXo/TkMoOuE-GhI/AAAAAAAAC4U/MSPqc_ey_j0/s720/Yohann%252520004.jpg

There's just something about bronze that is great to feel in the hand.
Brass can't compare IMHO
That's an absolutely gorgeous piece of work there Bob.

[cooncatbob]

Got a vintage lather catcher with an itty bitty little handle?
Replace it with something more substantial like this.
https://lh5.googleusercontent.com/--urfd9uf-d4/Tkc4DNCxf4I/AAAAAAAAC5Y/ZPrcdfNvMKc/s720/Coty%252520002.jpg

[Alucard73]

Got a vintage lather catcher with an itty bitty little handle?
Replace it with something more substantial like this.
https://lh5.googleusercontent.com/--urfd9uf-d4/Tkc4DNCxf4I/AAAAAAAAC5Y/ZPrcdfNvMKc/s720/Coty%252520002.jpg
Nice. Can't wait to get my hands on one!

[cooncatbob]

Here's some more SE handles.
https://lh5.googleusercontent.com/-yhuOBML03Js/Tkmld0Z0kgI/AAAAAAAAC6A/PlyZov7ZO78/s720/Harry%252520SEs%252520002.jpg
https://lh3.googleusercontent.com/-plP_sYEEDNE/Tkmlga-4-eI/AAAAAAAAC6E/ERpPMwVGt2c/s720/Harry%252520SEs%252520005.jpg
https://lh5.googleusercontent.com/-CCpQqqRJd78/TkmliMsT4UI/AAAAAAAAC6I/4ZuL6kX3bMY/s720/Harry%252520SEs%252520006.jpg
https://lh3.googleusercontent.com/-rXZPrCo2t_U/TkmllDNBmaI/AAAAAAAAC6M/DqaXSBx7qcI/s720/Harry%252520SEs%252520009.jpg

[Doodi1]

They are MINE, MINE, all mine.:001_wub: Beautiful work Bob, cannot wait to get them back home!:thumbup1:

[subzero]

Just received my Bull Mastiff Deluxe XL w/Flared Knob and NEW Head. Words cannot do justice to the beauty and grace of this custom razor. Great communication and top quality workmanship made the whole process such a pleasure. I'm hooked now, and will be looking into grabbing another one of your famous pieces. Thanks again Bob.

[Alucard73]

Got a vintage lather catcher with an itty bitty little handle?
Replace it with something more substantial like this.
https://lh5.googleusercontent.com/--urfd9uf-d4/Tkc4DNCxf4I/AAAAAAAAC5Y/ZPrcdfNvMKc/s720/Coty%252520002.jpg
It came in today. Another work of art. Thanks.

[jsj_297]

Hey Bob, super interested in upgrading my EJ89 series razor handle.....Any recommendations? I really like that bronze handled one by the way....U interested in experimenting, or allowing me to be a recepient of a new creation? Let me know....... thanx!!!!

[cooncatbob]

I'm going to post pictures of 2 shorter 2 tone handles tomorrow.

[BigRich]

Hey Bob, super interested in upgrading my EJ89 series razor handle.....Any recommendations? I really like that bronze handled one by the way....U interested in experimenting, or allowing me to be a recepient of a new creation? Let me know....... thanx!!!!

Bob made a handle for my EJ89 to match the brush he did. You will not be disappointed. The worst part is having to choose which handle!

[jsj_297]

I'm going to post pictures of 2 shorter 2 tone handles tomorrow.

Awesome, cant wait to see them!!!!

[jsj_297]

I'm going to post pictures of 2 shorter 2 tone handles tomorrow.

Awesome, cant wait to see them!!!!

[cpool222]

Is anyone else having the same trouble as me... on the posts where Bob puts pictures of his razors, the pictures aren't there on my computer, just a black box with a minus sign inside a circle. When others respond with a picture, it comes through. Any ideas? Thanks

[AABCDS]

What posts are you having problems with? For post numbers 618, 621, 622, 636, 654, 667, 669, and 671, the pictures show up just fine for me.

For some of Bob's first posts in this thread, like post numbers 1, 6, 10, 16, 33, and 38, I have the same problem. The pictures must have been moved from their original linked location from the third party hosting site. Even when they have been quoted by other members, I still see a black circle with a minus sign in the middle.

[cooncatbob]

Old post are from 2 1/2 years ago, pictures have probably been deleted.
A lot of the early stuff is obsolete and have been replaced by more refined designs.

[cooncatbob]

Here's some new stuff.
4inch Bull Mastiff Deluxe with knurled double rings and a double banded flared knob.
https://lh3.googleusercontent.com/-rmbb_y6N8FA/TlwKzuwEaVI/AAAAAAAAC7Y/9HZKXKg_Nu4/s640/005.JPG
3 1/2 inch Two Tone Bull Mastiff Deluxe with flared knob, Barrel is solid Bronze.
https://lh5.googleusercontent.com/-QFTJJkzvDkU/TlwKzRDfsJI/AAAAAAAAC7U/OKpsprRLCv8/s720/007.JPG
3 3/4 inch Two Tone Bull Mastiff XL Deluxe with flared knob, Barrel is solid Bronze.
https://lh5.googleusercontent.com/-a2pl94zAE0o/TlwKz2EBm6I/AAAAAAAAC7c/CFsHDYLeBeg/s720/006.JPG

[JCinPA]

Bob, forgive me for questioning in your photo thread, but these are gorgeous. They all seem to have that open comb head.

I've fallen in love with my EJ DE 89 razors, I don't want to change that head. Do you make 'grippier' handles about the size and weight (or just a little more) than the Edwin Jagger Barley Chrome? I like the deeper knurling on your handles, but I don't want to upset the weight and balance too much. I think the Barley Chrome is 3.7" long and about 2.7 oz. If you have something close, I'd love it. I am willing to experiment with heavier weight handles, too.

Do you just sell the handle or can you put a Muhle 89 head on it and sell the complete razor?

Thanks, and sorry if these are stupid questions.

[KM-instructor]

Bob, forgive me for questioning in your photo thread, but these are gorgeous. They all seem to have that open comb head.

I've fallen in love with my EJ DE 89 razors, I don't want to change that head. Do you make 'grippier' handles about the size and weight (or just a little more) than the Edwin Jagger Barley Chrome? I like the deeper knurling on your handles, but I don't want to upset the weight and balance too much. I think the Barley Chrome is 3.7" long and about 2.7 oz. If you have something close, I'd love it. I am willing to experiment with heavier weight handles, too.

Do you just sell the handle or can you put a Muhle 89 head on it and sell the complete razor?

Thanks, and sorry if these are stupid questions.

They will fit I have the my Muhles set up on them .

http://img.photobucket.com/albums/v622/shane1000m/Bobs%20razor%20works/d0e6227f.jpg

[cooncatbob]

Handle are sold separately, since the heads are costly and time consuming to procure I only sell them to clients buying a handle.
My handles fit Metric heads.

[jsj_297]

How much one them 3 1/2 bronze run for sir??

[cooncatbob]

How much one them 3 1/2 bronze run for sir??

Sir:
I don't discuss prices on an opened forum, send me a PM of e-mail through my site.

[jsj_297]

10-4 sorry bout that.

[tchudson]

I love the long-handled brushes on your site right now.

[cooncatbob]

This Hoffritz Slant had a split all the way down the barrel so I made a new barrel and knob assembly.
https://lh3.googleusercontent.com/-tSdFKoQRrFk/TmVBR_M-UvI/AAAAAAAAC8E/-O74vW9Up38/s640/002-1.jpg

[LeGaulois]

Very beautiful.

[Doodi1]

I really like the Slant!:001_wub:

[TYdeFan05]

This Hoffritz Slant had a split all the way down the barrel so I made a new barrel and knob assembly.
https://lh3.googleusercontent.com/-tSdFKoQRrFk/TmVBR_M-UvI/AAAAAAAAC8E/-O74vW9Up38/s640/002-1.jpg

This is exactly what I have been looking for :001_tt1:

Great work!

[cooncatbob]

Just so people know the slant was sent to me by the owner to be rehandled, it's not available.

[MondoJ]

Here's some more SE handles.
https://lh5.googleusercontent.com/-yhuOBML03Js/Tkmld0Z0kgI/AAAAAAAAC6A/PlyZov7ZO78/s720/Harry%252520SEs%252520002.jpg
https://lh3.googleusercontent.com/-plP_sYEEDNE/Tkmlga-4-eI/AAAAAAAAC6E/ERpPMwVGt2c/s720/Harry%252520SEs%252520005.jpg
https://lh5.googleusercontent.com/-CCpQqqRJd78/TkmliMsT4UI/AAAAAAAAC6I/4ZuL6kX3bMY/s720/Harry%252520SEs%252520006.jpg
https://lh3.googleusercontent.com/-rXZPrCo2t_U/TkmllDNBmaI/AAAAAAAAC6M/DqaXSBx7qcI/s720/Harry%252520SEs%252520009.jpg

Bob, How long is the handle on the 1912 at the bottom? Please pm me a price

[Doodi1]

These beauties are all my razors. I am pretty sure it is 4-inches. I can measure the handle on the Damaskeene tonight and let you know.

[cooncatbob]

It's 3 5/8, it patterned after the handle on the Feather Stainless, I miss measured, the Feather handle is 3 9/16ths, that and my grooves are wider.

[Doodi1]

Bob, its a great handle anyway. Highly recommended for all who want a handle for a SE or DE razor.

[cooncatbob]

Here's another handle that was commissioned by a client.
https://lh5.googleusercontent.com/-Ez5COWuXrhI/Tm6MqLV-0mI/AAAAAAAAC8c/nS-F07EoqR0/s800/005%252520crop.jpg

[itsmedave]

Those are amazing!!!

[bakerbarber]

That is really nice!

The custom slant is slick too.

Seeing all those single edge razors makes me want to go pick up some blades.. I only used a SE a few times and PIF'd the blades.

Bob, your handles will work on a SE razor with a section of threaded rod? Or are they permanent set for a SE razor?

[JonM]

Here's another handle that was commissioned by a client.
https://lh5.googleusercontent.com/-Ez5COWuXrhI/Tm6MqLV-0mI/AAAAAAAAC8c/nS-F07EoqR0/s800/005%252520crop.jpg

That's my new baby! Oh man. I can't wait.

[cooncatbob]

Here's my latest Bull Progress Deluxe
https://lh6.googleusercontent.com/-wLAD35paUig/TnfSl2FvpTI/AAAAAAAAC8w/URz-9dfsNjg/s720/004.JPG

[brucered]

Here's my latest Bull Progress Deluxe

i LOVE it. and all you need for that one is the head from the Progress and you sever the handle, correct?

[cooncatbob]

i LOVE it. and all you need for that one is the head from the Progress and you sever the handle, correct?

Yes, the client provides the donor Progress, I cut the head assembly from the barrel and make a new barrel and knob assembly.

[cooncatbob]

Psycho Mania
https://lh6.googleusercontent.com/-sozFLnbchlc/ToEUtk-W1kI/AAAAAAAAC9s/_w5Svjf0Gos/s720/001.JPG
https://lh5.googleusercontent.com/-rLkcCLn1zEo/ToEUtolBmTI/AAAAAAAAC90/hYq1hWIGzzs/s720/002.JPG
https://lh5.googleusercontent.com/-Yjb8Njo5Jtc/ToEUtqoVssI/AAAAAAAAC9w/B4Fgj3tkkVs/s720/003.JPG
https://lh6.googleusercontent.com/-aQdtF6-X1fs/ToEUt2ftobI/AAAAAAAAC94/dHb06fn72sE/s720/004.JPG
https://lh3.googleusercontent.com/-i8dFBwAV1YM/ToEUujZXNbI/AAAAAAAAC98/oZQos7uI6Mo/s720/005.JPG

[Comfortably_Numb]

Bob,

Would you make a stainless steel multi razor holder - say for 12+ razors?

[verdict]

Here's my latest Bull Progress Deluxe
https://lh6.googleusercontent.com/-wLAD35paUig/TnfSl2FvpTI/AAAAAAAAC8w/URz-9dfsNjg/s720/004.JPG

Bob, would it be possible for you to do the same - but to a Slim Adj.?

[cooncatbob]

Bob, would it be possible for you to do the same - but to a Slim Adj.?
No. At least not by me with the tooling I have available.
Totally different adjustment mechanisms, Progress has a relatively simple spring loaded blade platform control by the graduated knob assembly.
With the Gillette adjustable TTOs the handle is part of not only the open mechanism but also the adjustment.

[Ozgun]

Here's my latest Bull Progress Deluxe
https://lh6.googleusercontent.com/-wLAD35paUig/TnfSl2FvpTI/AAAAAAAAC8w/URz-9dfsNjg/s720/004.JPG

Oh my foaming soap! I'm gonna die, its so beautiful.. :em18:

[Doodi1]

Here's my latest Bull Progress Deluxe
https://lh6.googleusercontent.com/-wLAD35paUig/TnfSl2FvpTI/AAAAAAAAC8w/URz-9dfsNjg/s720/004.JPG

I shaved with mine today. Awesome shave!

[verdict]

No. At least not by me with the tooling I have available.
Totally different adjustment mechanisms, Progress has a relatively simple spring loaded blade platform control by the graduated knob assembly.
With the Gillette adjustable TTOs the handle is part of not only the open mechanism but also the adjustment.

I see, thanks for your response.

[jasterixstrange]

Here's a standard Bull Mastiff handle with the new Flared Knob option.
http://lh4.ggpht.com/_6P_7INYCblE/TOrg9kW7OcI/AAAAAAAACX0/EpIRZZYnXbQ/s720/Flare%20Knob%20002.jpg

i know these knobs help balance the razor but how sexy would this be if the knob was hollowed out and the handle was the deluxe version ... *drool*

[cooncatbob]

i know these knobs help balance the razor but how sexy would this be if the knob was hollowed out and the handle was the deluxe version ... *drool*

The knobs are removable and interchangeable, I offer this knob option on the Deluxe Bull Mastiffs all the time.
Some client buy both knobs ar this knob is several grams lighter then the standard knob.

[cooncatbob]

Due to a wood allergy I have some blanks of Bolivian and East Indian Rosewood which I can not use.
If anyone is interested send me a PM.

[cooncatbob]

Wood is sold.

[ackvil]

Bob, is there any difference in the length of the Bull Mastiff and Bull Mastiff DeLuxe?

[cooncatbob]

Bob, is there any difference in the length of the Bull Mastiff and Bull Mastiff DeLuxe?

All the Bull Mastiff handles are sold in standard and deluxe versions, the only difference is the cut grooves on the barrel and $5.

[cooncatbob]

I don't turn many brushes and never one with a 30mm not before.
This thing is a beast and the last item I turn from East Indian Rosewood as it's giving me a rash when I turn it in spite of all the protection I wear
https://lh6.googleusercontent.com/-bncRUBNNTFg/TptS-p_Ay8I/AAAAAAAAC-Y/sbnD__m00B0/s512/004%252520%252528Large%252529.JPG
Here's a picture with it next to a normal size brush,
https://lh6.googleusercontent.com/-dTZ6Pz2cCeM/TptS-lOsylI/AAAAAAAAC-c/WEwVI7DR0tU/s512/001%252520%252528Large%252529.JPG

[brucered]

The knobs are removable and interchangeable, I offer this knob option on the Deluxe Bull Mastiffs all the time.
Some client buy both knobs ar this knob is several grams lighter then the standard knob.

so if buy a standard Bull Mastiff handle and want to add a knob later, i can do that?

[CyberJCM]

Hi Bob!

This is my first time really looking at and considering your handles before, and I really dig 'em!

I recently got a Muhle R89 razor, which I love. But the stock handle, while nice looking, is very slippery and lacks serious grip. I'd like to refit it with one of your handles. Can you make any recommendations on which to go with, or what you could put together? I like a slightly longer handle, but not as long as a barberpole. I want serious grip all around and definitely at the tip. A nice balanced weight, nothing real hefty. And I want it to compliment the Muhle R89 head, not look oversized to it.

Look forward to your thoughts!

[cooncatbob]

so if buy a standard Bull Mastiff handle and want to add a knob later, i can do that?

No, handles are sold with the knob of your choice, if you want to remove the knob to shave that's up to you.

[cooncatbob]

Hi Bob!

This is my first time really looking at and considering your handles before, and I really dig 'em!

I recently got a Muhle R89 razor, which I love. But the stock handle, while nice looking, is very slippery and lacks serious grip. I'd like to refit it with one of your handles. Can you make any recommendations on which to go with, or what you could put together? I like a slightly longer handle, but not as long as a barberpole. I want serious grip all around and definitely at the tip. A nice balanced weight, nothing real hefty. And I want it to compliment the Muhle R89 head, not look oversized to it.

Look forward to your thoughts!

If you want to discuss business you need to send me a PM.

[CyberJCM]

If you want to discuss business you need to send me a PM.

Actually, I was just looking for your thoughts on it before I made a choice if any. Thats ok though. Thanks.

[cooncatbob]

All the knobs are attached with a piece of #10-32 SS threaded rod that's held by lock-tite to the knob.
Knobs are removable and interchangeable, spiral and fluted knobs weigh about 24 grams, flared knobs are several grams lighter and the wooden knobs are under 10 grams.
Improved handles are available in just about any length and diameter you wish (within reason) and with a round or square butt.

[cooncatbob]

good to know, thanks Bob...i had no idea the improved was available in different diameters and different butts....now i have even more to think about.

Most often the Improved is request in standard diameter 7/16 or HD 1/2 inch, the square butt gets a magnet installed in the end.

[CyberJCM]

Thank you TYdeFan05! That helped a great deal actually. I've got a much better idea now thanks to you and a couple others what I could expect were I to go with Bob's handles. I'll be looking elsewhere.

[LeGaulois]

Thank you TYdeFan05!

+1

[TheRazorSleepsForNoOne]

http://i405.photobucket.com/albums/pp133/TYdefan05/DSC08231-1.jpg

Muhle head on a Cooncat Bull Mastiff Deluxe XL with flared knob


Is that the XL or XXL handle?

[CapnPanther]

Bob,

Do you still do the black anodized Bull Mastiff handles and would it be available in the deluxe as well as the standard version? How would the weight compare to the regular Bull Mastiff?

[CyberJCM]

You do realize this section of the forum isn't for discussions, it for me to show pictures of my stuff.
Please don't post your pictures in my vendors thread, that's what the safety razor forum is for.
There a link in my signature to my website where's theres slideshows of most of my razor handles.

Honestly, you should thank the other members for trying to assist in selling your "stuff", since you didn't seem to want to do that yourself. They were responding to a politely asked question about which of your handles would best fit a particular razor head with actual picture examples that tried to answer that question. It wasn't their responsibility to do so, it should have been yours.

[TheRazorSleepsForNoOne]

You do realize this section of the forum isn't for discussions, it for me to show pictures of my stuff.
Please don't post your pictures in my vendors thread, that's what the safety razor forum is for.
There a link in my signature to my website where's theres slideshows of most of my razor handles.

I didn't post the picture, I quoted it. Nevermind the fact there's nothing in the rules that says people can't post in vendor's threads. But yeah, um, so much for that. I'll save my money. Geez. You're quite the rude fellow as I'm noticing now.

[brucered]

I didn't post the picture, I quoted it. Nevermind the fact there's nothing in the rules that says people can't post in vendor's threads. But yeah, um, so much for that. I'll save my money. Geez. You're quite the rude fellow as I'm noticing now.


Honestly, you should thank the other members for trying to assist in selling your "stuff", since you didn't seem to want to do that yourself. They were responding to a politely asked question about which of your handles would best fit a particular razor head with actual picture examples that tried to answer that question. It wasn't their responsibility to do so, it should have been yours.

Sorry Bob....

+1 agreed...I'm out on the CoonCat handle or wanting to purchase one any longer.

[cooncatbob]

No Anodized aluminum available at this time, the anodizing shop I was using had too large of a minimum batch size (50 pieces) and they all had to be the same color.
I hope to find an anodizer who will allow me to offer handles in a rainbow of color.
The aluminum handles weigh about 1/3rd the weight of the brass handles, BM handle 26 grams versus 78 for brass handle.


Bob,

Do you still do the black anodized Bull Mastiff handles and would it be available in the deluxe as well as the standard version? How would the weight compare to the regular Bull Mastiff?

[Angry__Panda]

No Anodized aluminum available at this time, the anodizing shop I was using had too large of a minimum batch size (50 pieces) and they all had to be the same color.
I hope to find an anodizer who will allow me to offer handles in a rainbow of color.
The aluminum handles weigh about 1/3rd the weight of the brass handles, BM handle 26 grams versus 78 for brass handle.

So how much do your wooden handles weigh then? I know I already am going to be getting one heh, but just curious in comparison. Looking forward to getting my first handle and then hoping I don't end up like KM-Instructor and buying 12 or 13 more R41's and then needing handles for all of them rofl.

[cooncatbob]

Varies depending upon length and knob options but about 45 grams.

[TYdeFan05]

nevermind

[speas]

Hi Bob,
Have you made a fat handle like the EJ Georgian? Might consider one in ebony wood. Thanks

[cooncatbob]

Hi Bob,
Have you made a fat handle like the EJ Georgian? Might consider one in ebony wood. Thanks

I've actually made 2, this one out of Black and White Ebony, I don't use this wood anymore as it's prone to crack after it's turned.
https://lh3.googleusercontent.com/-hWn9gn852Ds/SYDMxxu705I/AAAAAAAACJY/YzKuz6-KhAY/s640/NEW%252520handle%252520014%252520%252528Large%2525 29.jpg
and this one from Purpleheart, after I made it the client backed out, now I require payment in advanced on 1 off customs, this handle sat on my site for 6 months, I ended up discounting it to one of my regulars.
https://lh6.googleusercontent.com/-LD5qQeUgAc4/SrMHyVqJwfI/AAAAAAAACJY/d_iAwnqOR_0/s640/Purple%252520Heart%252520001.jpg
Black ebony would be a good choice.

[roboboticus]

I thought ebony was a protected wood nowadays, and thus illegal to buy/sell? I work at a woodworking shop and there was some idle chat on the subject recently, though I don't recall the details. I know Gibson guitars had some kind of legal troubles recently involving their rosewood sources and documentation.
Just curious.

[edrose]

Not all species from all countries are illegal to buy/sell. ;)

http://www.cites.org/eng/news/press_release.php

[roboboticus]

That explains it then. Thanks, edrose!

[verdict]

Hi Bob,
Is there any way you can elongate a golden Merkur HD? I like the head of the razor, but I'd like the razor to be longer. I know you can pull out the ring/knob at the bottom so maybe you can work with that.

[cooncatbob]

Hi Bob,
Is there any way you can elongate a golden Merkur HD? I like the head of the razor, but I'd like the razor to be longer. I know you can pull out the ring/knob at the bottom so maybe you can work with that.

I can cut the head from the barrel and make a new barrel and matching knob assembly, but the shop I use doesn't do gold plating just nickel, but an item would have to be nickel plated before being gold plated so you'd just need to find someone to do the gold plating.

[cooncatbob]

Here's another client requested handle.
I call it the Baby Bull shown here with a nickel plated Tech Head.
https://lh6.googleusercontent.com/-QAKVNQmmfeI/TsPzhKSC-RI/AAAAAAAADAY/KvR8RgECES4/s576/003crop.jpg

[acutao]

Nice!

Where's the Bob's custom travel tin to house it?

[cooncatbob]

Nice!

Where's the Bob's custom travel tin to house it?

Take an Altoid tin and a can of spray paint.

[roboboticus]

Very cool! How much does it weigh?

[cooncatbob]

Very cool! How much does it weigh?

45 grams.