DeRuitem Brushes for sale

[deruitem]

I decided I am going to start a new thread and just add to it rather than doing a new one each month.
The faux ivory from the September sale is still available here (http://badgerandblade.com/vb/showthread.php/247961-DeRuitem-Brushes-for-September?p=3476635#post3476635)

Next up is a 24mm Boar loft is about 50mm. The knot came from TGN

The handle is blue and red, it does have some imperfection but is still very nice.
$30 shipped CONUS


As alway PM me for customs or with any questions

[deruitem]

Here is my current line up

24mm ivory silvertip
This one is a short loft silvertip in ivory
24mm knot
43mm loft
Base of handle 42mm Dia
48mm tall
The handle is not 100% flat at the bottom but is very close
$50 shipped Conus


next
Next up is a 24mm Boar loft is about 50mm. The knot came from TGN

The handle is blue and red, it does have some imperfection but is still very nice.
$30 shipped CONUS


Next is a 22mm Finest Fan Faux horn
49mm loft
50mm handle

$50 shipped CONUS
The handle does have a little swirl mark on the bottom I could not get it to show in a picture

Link to previous posts
http://badgerandblade.com/vb/showthread.php/247961-DeRuitem-Brushes-for-September?p=3476635#post3476635
PM me for custom work

[chuckr9]

I purchased one of the Faux Horn brushes and really like the pattern.

[deruitem]

Here is another brush

24mm Finest in Red Swirl $50 shipped CONUS
Loft is 50mm (not yet glued in so I can raise or lower the loft just a tad)
Handle is 50mm tall

All of the above brushes are still available

Just wanted to add that if you are interested I could also sell just the red handle. Just let me know!

PM me if interested or interested in a custom

Thanks for looking

[deruitem]

Update!!!!

I will include a black plastic stand for free with the 22mm Fuax Horn fan. I only have one stand and this is the only brush that it fits nice.

Thanks for looking and shoot me a PM with any questions or custom requests

[deruitem]

I want to make someone a 24mm finest with the red material above. Any takers for $50 shipped CONUS?

[deruitem]

22mm black and white acrylic handle for sale. It is 50mm tall. It is ready just let me know how deep you want the hole, you may have to open it up a touch for your knot. You can also contact me if you want me to knot it for you via PM. Handle only is $35 shipped CONUS via paypal.

[deruitem]

One of my brushes shows up several times. It is the one with the red handle


http://www.youtube.com/watch?v=owvOMOH3NTo

[deruitem]

Hi everyone, I created a flickr account to keep some pictures of my stuff. Please leave some comments and tell me what you think

http://www.flickr.com/photos/deruitembrushes/

[deruitem]

I have another brush for sale $50 shipped CONUS. 22mm Silvertip, use my link to ETSY on my siganture line to see more pictures or make purchase. You can pick the loft. Feedback is always welcome and you can PM me for custom work

[mftoms59]

I just wanted to thank you for the great service and fast delivery of my Boar Brush. The Brush has been through three lathers and the tips have begun to splay, the knot is dense and loads hard soaps quickly. I love the look, shape & bigness of this handle, it's easy to hold and doesn't slip. I definitely want another Boar Brush but I'll have to wait till my Birthday, Here are some post lather photos.

[deruitem]

Just posting some pictures of what I have available for blanks. The wood pieces are marblewood and orange osage, the others are acrylic or poly

I will be getting more soon, PM me if you want any custom work or see my etsy link on my signature line for what I have ready

[deruitem]

22mm Handle in black and white. I have some silvertip knots in stock and will be ordering more from TGN soon if you want something else. The handle is $35 shipped and with a silvertip standard grade $50. You can pick the loft.

PM me for custom work, I am a little backed up but I can always keep a look out for more blanks and get ready for more


Thanks for looking

Matt D

[mftoms59]

Thanks Matt, I received my two Custom Handles Wednesday; a Red/White/Blue Swirl Milk Churn Style; 2 1/8" high, top is 5 1/2", middle 5 3/8" & the base is a whopping 5 7/8" in diameter, nice & heavy in my hand. I love the size, bulk & color pattern and set a TGN 24mm Black Badger @~48mm, the Black Badger really contrasts the predominately Red Handle nicely.

The second handle is a Bulb Type, Green & Black marble pattern with a smattering of Silver speckles; 2" high, neck 4 1/2" and base 5 7/8" in diameter, another heavy bulky Handle that feels great in my hand. I set a TGN 20mm Super Fan XD knot @ 50mm, the white Tips are very soft and contrast the Dark Colors very nicely. Here are a few pre-bloom photos, right now they are both sitting in an overnight lather so the Post Bloom photos will follow after drying.

Once again thanks for the Fantastic Job and allowing me so much input toward the development of both Handles and I must say the Photos really don't convey the beauty of them as when viewed in "the Flesh".

[deruitem]

Thanks Tom it was great to work with you. I hope you like them

[mftoms59]

I Love Them Matt, Here are some Post Bloom photos, The Bloom of the Black Badger wasn't as severe but is noticeable.

[RevSmoke]

Matt, I don't think you found this thread where I posted pictures of the brush you completed for me. http://badgerandblade.com/vb/showthread.php/275970-Deruitem-Brush?p=3848684&highlight=#post3848684

Just want to publically say thanks for well done job!

My youngest son (15) went into the bathroom and I heard him exclaim, "Wow, cool brush," and he came out of the bathroom brushing his face with it, "Dad, this is such a cool brush."

Thanks for making me look good in my son's eyes!

Peace of the Lord be with you.

[deruitem]

Matt, I don't think you found this thread where I posted pictures of the brush you completed for me. http://badgerandblade.com/vb/showthread.php/275970-Deruitem-Brush?p=3848684&highlight=#post3848684

Just want to publically say thanks for well done job!

My youngest son (15) went into the bathroom and I heard him exclaim, "Wow, cool brush," and he came out of the bathroom brushing his face with it, "Dad, this is such a cool brush."

Thanks for making me look good in my son's eyes!

Peace of the Lord be with you.

Must be something about shaving, my 4 year old thinks its cool.

15 it wont be long and he will need a shaving brush

Glad you like it

[RevSmoke]

Must be something about shaving, my 4 year old thinks its cool.

15 it wont be long and he will need a shaving brush

Glad you like it

Yeah, was thinking about just that point. Have you got, or can you get - some of the same material in black and orange? Or more of the green & yellow?

[deruitem]

I have a short piece left in the same color as yours and I can get black and orange 221130

[RevSmoke]

I have a short piece left in the same color as yours and I can get black and orange 221130

OK. I cannot do this now, but will want two brushes made for my sons - at some point in the future. Orange & Black are their school colors. I will need to find out what colors they'd like though. And, I'll need to set aside the funding.

Thanks again Matt.

[deruitem]

Here are some materials I have in stock. Two look the same but one has a little purple mixed in with the black and gold. The wood is orange osage and has a coat of wax on it so it will look lighter in color when complete.

[deruitem]

more pictures

[michiganlover]

Just wanted to post a photo of the brush Matt recently made for me. I wanted him to duplicate the design of the VDH Boar brush's handle, but of course have a much fancier handle material. It has a 20mm Best Badger knot. It's a true thing of beauty!! :drool::drool:

http://badgerandblade.com/gallery/displayimage.php?imageid=34074

[deruitem]

Here is what I have right now for materials. PM me for some custom work

[deruitem]

A new 22mm handle is available. I can also install a knot in TGN or whippeddog silvertip standard grade. If you are interested in another knot let me know.

Handle only $35 shipped CONUS or $50 with a silvertip standard grade installed. As always shoot me a PM for a custom.

236926

236927
Also stay tuned for a way you may be able to win a free brush. Details to come soon

[deruitem]

For the first time in a long time I am not back logged. So if you want a custom shoot me a PM.


Also check out my contest from my signature line

[deruitem]

I just wanted to let everyone know that I am still taking orders. I have not posted in sometime.

the blue handle and or brush above is still available. I have a couple of orders to do but I am getting caught up. thanks to those who posted in my contest it was a lot of fun. If you are looking for some custom work shoot me a PM

Thanks !
Matt D

[deruitem]

I have another handle for sale in butterscotch. It is ready for a 22mm knot, you can tell me how deep you want the hole. It is a shorty but is very comfortable in the hand. 49mm tall 35mm at the base and 29mm in the waist. PM me if interested

$35 shipped CONUS
259656
259657
259658

Stay tuned for more

[Captain Pre-Capsize]

That will be a very comfortable handle shape for someone, nice job.

[USCGME3]

Beautiful handle!