Feather Nightmare

[wess76]

I Just finished my first shave with my feather artist. I have tons of cuts and razor burn everywhere. I am not sure what the speed and length of my strokes need to be. I am having a particularly tough time in the neck area. Any suggestion on technique or just general helpfull suggestions. Would be greatly appreciated. Thanks, Wess

[AACJ]

First, let you nicks and cuts heal or you will keep opening them up, then start again.

Practice on your forearms and thighs. Go slow. I shaved mine bare after I shaved with my Feather after my first time shaving with it and got similar results as yours. I thought the razor was too agressive, but came to the conclusion that the razor is only as agressive as the operator of it. Light, smooth strokes, and pull your skin tight othewise it will bunch up and get cut.

Use the most lubricating shaving cream/soap you can find at first too.


Good Luck and let us know how it works out.




I Just finished my first shave with my feather artist. I have tons of cuts and razor burn everywhere. I am not sure what the speed and length of my strokes need to be. I am having a particularly tough time in the neck area. Any suggestion on technique or just general helpfull suggestions. Would be greatly appreciated. Thanks, Wess

[wess76]

"Smooth strokes". I think that was the culprit. I was using very quick and short strokes. Thanks for the reply. Wess

[roughrider]

Be sure to check the angle of the blade.

[CraigK]

Just tried it out for the first time tonight. All and all the experience was not that bad, reminded me of the first time I used a DE. I got three or four nicks and I'm feeling some razor burn. I found my chin the most difficult and it still has quite a bit of stubble. I also noticed the blade wants a very slick surface to do its job, much more so than a DE. Soap would be on my face, maybe damp but not quite slick enough. After a re-lather it worked perfect. The soap might be drying out because I'm taking more time and precaution. I'll keep working on it.

CraigK

[KUJO]

As always gents, remember to give it only the lightest of touches in the beginning. As you calibrate your skins tolerance, you can apply more pressure.

I have found it very helpful to listen to the razor as I shear away. It gives me instant feedback on whether I'm tugging too hard or maybe have too much or too little angle.

[joel]

I Just finished my first shave with my feather artist. I have tons of cuts and razor burn everywhere. I am not sure what the speed and length of my strokes need to be. I am having a particularly tough time in the neck area. Any suggestion on technique or just general helpfull suggestions. Would be greatly appreciated. Thanks, Wess

I hear your pain.... the following is NOT for the weak at heart. These are some pics from my first few feather run-in's.....

http://www.badgerandblade.com/images/tfa/ouch/P1010094.JPG

http://www.badgerandblade.com/images/tfa/ouch/P1010091.JPG

http://www.badgerandblade.com/images/tfa/ouch/P1010090.JPG

http://www.badgerandblade.com/images/tfa/ouch/P1010089.JPG

http://www.badgerandblade.com/images/tfa/ouch/P1010088.JPG

After I got the hang of it, it provided superb shaves with zero irritation, but in my experience it is NOT like a standard straight razor, as I have NEVER had a problem with a "true" straight, but this feather kicked my ass 2 ways to Sunday the first week. Be VERY light, almost lay it totally flat, and take 'er easy and you'll hit the sweet spot.

[Kyle]

Yowsa! That looks more painful than getting kicked in the special place.

[wess76]

My goodness! I had a bad first shave but nothing compares to that disaster. Joel, I bet you had to lay off of that straight for a week or two. Man, I feel your pain. I took everybody's advice and my shaves have been getting better. Not great but better. All in all though, I think that I will really enjoy using the feather when I have time. Thanks for all the advice so far. Keep it light and lay it flat!!!!! Wess

[KUJO]

I hear your pain.... the following is NOT for the weak at heart. These are some pics from my first few feather run-in's.....

Joel, you win this year's perseverance award. If a razor left me with a mug like that, I'd as soon have joined these guys:

http://beardcommunity.com/ (I think they're our bizarro-world counterparts)

http://badgerandblade.com/gallery/displayimage.php?imageid=1900

[htownmmm]

:eek:

I know one thing- if a straight can make your face look like that in the first week of usage, I'll be a DE man for life.




Marty

[Austin]

Joel, so how many pints of blood did red cross have to bring? :biggrin:

Dude, that totally looks like a massacre.

[obsessis]

I shaved with my feather for the first time the other day. I got a couple of nicks, worse than any small DE nick...I think you need to get a couple to figure out where the tough spots are....mine are along the jawline. I need to figure out exactly how to attack certain spots still.

I had a couple red spots in my shaving cream when I was starting my second pass.

[AACJ]

I usually get my nicks above my lip and on the front of my chin. My neck, cheeks and jaw line are the easiest to do, for me at least.

Obsesis,
How do you attack chin and above the lip?

[obsessis]

the moustache area i did on each side of my nose and did a lot of scraping from the top down in the middle. on the sides of the nose it seemed easier to go straight down.

i am still trying to determine how i attack the chin, and the underside of the chin/jaw on the right side. it is hard to handle the razor in those areas for me at this point.

[Flounder]

I switched from a mach 3 to a feather never touching a DE... I used the feather and had to get a transfusion.... so I now started with the DE.... maybe I'll go back to a strait in time... but the DE is so faster than the feather... I might be thinking about selling the feather tho... I gotta decide.

But good luck with the feather...

[AACJ]

I would suggest you keep the Feather or give it another go. How much pressure did you use? I find that the least amount of pressure works the best, try to shave just to remove the thin layer of shaving cream from your face and see what happens. Or at least do your cheeks and neck and leave the chin and upper lip for the DE, until you master the Feather.

Don't give up!!


I switched from a mach 3 to a feather never touching a DE... I used the feather and had to get a transfusion.... so I now started with the DE.... maybe I'll go back to a strait in time... but the DE is so faster than the feather... I might be thinking about selling the feather tho... I gotta decide.

But good luck with the feather...

[Jonnybc]

Ouch!!

I'm glad you can't get hold of those razors in England, I'd just have to get one!

Cheers
John

[roughrider]

I usually get my nicks above my lip and on the front of my chin. My neck, cheeks and jaw line are the easiest to do, for me at least.



I'm totally the opposite.

[Steelforge]

Lol I just stumbled across this thread after missing it the first time around. I kinda wish I'd seen this before placing an order for a Feather Artist Club DX yesterday!! :eek:

Oh well, at least I have a years experience using straight razors so I'm hoping I have enough control to not lacerate myself too badly! :001_unsur

[ScottS]

Have fun with that!! In all seriousness, there's a great chance you'll love it. Have you used a straight before?? If not, you might want to work out the logistics by a run through with no blade. Then, pop a blade in, and shave a small patch off your arm. Then, gird your loins and have at it.

I've been shaving pretty much exclusively with the AC for about a year and a half, with a quick regression for traveling without a checked bag. Might try a traditional straight some day, but I can't really see myself going back to a DE.

[Wil]

Steelforge-

Yeah thanks a lot- was JUST getting the images of Joel out of my mind- and now you pull me back to THOSE photos:eek:

I have Feather A/C and use Super Pro Blades- Patience angle and pressure are key-

also use a very generous amount of shave cream/soap- because if you don't and skimp on quality there...... look at the photos of Joel again:a47:

[Doc4]

The feather blade is very sharp indeed. As mentioned before, this is not like a regular straight shave ... much sharper and much less feedback and 'give'. The key is to use almost no pressure at all ... like the blade is hovering over the skin.

But once you get the hang of it, you'll no doubt love it.

[Suzuki]

Lol I just stumbled across this thread after missing it the first time around. I kinda wish I'd seen this before placing an order for a Feather Artist Club DX yesterday!! :eek:

Oh well, at least I have a years experience using straight razors so I'm hoping I have enough control to not lacerate myself too badly! :001_unsur

Don't get too cocky - I used my AC after several months of straight shaving and after reading all the posts about how light a touch you need to use and still did a number on myself.

The Feather straights are quite heavy and unforgiving - a bad combination when you pair it with their ultra-sharp blades.

Unlike all but the heaviest of grinds, a traditional straight gives you much more feedback than the Feather (or at least the AC), so the first indication that something is wrong is the flowing of blood. You can also give yourself some pretty severe razor burn with a Feather.

The Dovo Shavette gets mixed reviews, but I definitely think its more forgiving than the Feather razors.

That being said, I agree with Joel that the AC is a great shaving tool - once you get the hang of it. I don't use mine that much, but still like to have it in the rotation.

[Steelforge]

Well fingers crossed I'll be able to get the hang of it. I went through several weeks of looking worse than joel's photos when I first started with traditional straights, so hopefully I've spilled enough blood!

[Ricardo]

Hi Wes,

Tips I learned to tame the Feather AC:

1. "Don't fear the Feather" as someone wrote. Once I got over my initial fear, my shaves became easy (my worse slice on my face came with a Slant DE).

2. Shaving with a Feather AC is a unique skill set. Many of the techniques of DE or traditional straights don't transfer well to the AC. "Un-learn" the 30 degree angle of the DE and switch to a flatter angle. This allows the blade to slice right through my hair with less of a scraping action than 30 degrees provides, which irritates my skin less. I have not tried a traditional straight, but I don't see it as a disadvantage since it was one less thing to "un-learn". I am getting my best shaves ever with the AC, so right now I don't see a need to go to the traditional straight and its associated RAD. I use the low angle, light touch, long continuous strokes as seen in this video (http://www.youtube.com/watch?v=NCZLjRs0068).

3. I am a "corker'. I cork the blade before the first use to get a much better shave starting with the first shave. Feather blades mellow with each use, so I am not surprised that you did not get the greatest results on the first shave. There is a long thread on this forum, with much controversy, about corking. Some consider corking wet shaving heresy. My anecdotal testimony is that my first few shaves with a new blade looked like Joel's pictures, but those incidents completely disappeared once I started corking. Decide for yourself if it helps or not.

I also shave my head with the Feather AC, which I find easier to shave than my face. A steady hand and a soft touch is all I need. It is also important not to rush when using this tool, so I shave at night.

[SilkySmooth]

I wouldn't shave at all until your wounds heal.

[MattH]

Well fingers crossed I'll be able to get the hang of it. I went through several weeks of looking worse than joel's photos when I first started with traditional straights, so hopefully I've spilled enough blood!

Ok thats fills me with dread...

Which Feather Dx did you go for ? Was it through ClassicShaving or the Japan shopping service on here ?

Ta

Matt

[Steelforge]

Oh, it was the $199 stainless one with the plastic handle from Classicshaving, the DX I think. And one pack of each of the types of blades, except the ones with guards.

Oh god, let me guess, I'd have saved loads buying it somewhere else? :frown: :rolleyes:

[Suzuki]

You'd have saved 50% if you bought the AC instead of the DX.

Not sure if there's much difference in the way they shave - one may be ligher than the other, but I only have the AC.

Anyone care to comment on the difference between the AC (plated brass) vs DX (solid stainless steel) - and whether the DX is worht the extra $100?

[Doc4]

You'd have saved 50% if you bought the AC instead of the DX.

Not sure if there's much difference in the way they shave - one may be ligher than the other, but I only have the AC.

Anyone care to comment on the difference between the AC (plated brass) vs DX (solid stainless steel) - and whether the DX is worht the extra $100?

Actually, they are all 'AC' (Artist's Club), the difference is between the DX (costly steel) and RG (cheap brass). No biggie.

I have the RG only. I find it hard to see how the shaving performance would be markedly different, since it's just a holder for the blade in exactly the same shape. Maybe different weight affects things?? Presumably the DX would last longer with wear and tear.

[Suzuki]

Actually, they are all 'AC' (Artist's Club), the difference is between the DX (costly steel) and RG (cheap brass). No biggie.

I have the RG only. I find it hard to see how the shaving performance would be markedly different, since it's just a holder for the blade in exactly the same shape. Maybe different weight affects things?? Presumably the DX would last longer with wear and tear.

The weight could be a big factor - the RG is quite heavy (I sais AC instead of RG) and I wondered if the SS variant was lighter, which could result in a razor with better feedback.

As for durability - I have a hard time seeing how anyone could wear out an RG with a lifetime of normal use - they're veyr solid razors.

[MattH]

Oh, it was the $199 stainless one with the plastic handle from Classicshaving, the DX I think. And one pack of each of the types of blades, except the ones with guards.

Oh god, let me guess, I'd have saved loads buying it somewhere else? :frown: :rolleyes:

No tbh its either classicshaving or some site in Japan.. and the price is about the same. I just wondered in case you had found another supplier :)

[Ricardo]

You'd have saved 50% if you bought the AC instead of the DX.

Not sure if there's much difference in the way they shave - one may be ligher than the other, but I only have the AC.

Anyone care to comment on the difference between the AC (plated brass) vs DX (solid stainless steel) - and whether the DX is worht the extra $100?

The only reference I have seen that states there may be a quality difference between the DX & RG was from one of Joel's posts (http://badgerandblade.com/vb/showpost.php?p=247334&postcount=69) in the corking thread.

[judge]

I have one of the Feather Professionals before they did the Artist and it took a couple of shaves, one nice cut on my cheek, some healing time, then back on the saddle. I did end up trying the first pass with Nanka cream by feather. That helped. After Pass1, I lather with soap and off I go.

[izlat]

Boy, am I glad I didn't take up Michael's offer to send me his Feather!

I love a challenge and don't like to give up but this is just too brutal for me

Cheers
Ivo

[Christoph]

Wow! I've had pleasty of nicks like that in the past. I've used feathers, and frankly they're just too damned sharp. Why do we need blades that sharp? I took me a while to realise that blade sharpness is just one aspect of getting a great shave. I'll take top quality preshave prep and technique and an average blade before I mess with feathers.

[FloppyShoes]

Goes to show you, very sharp does not mean very good. This is a classic newbie misconception. I too was under the impression that the sharpest blades are the best when I first started wetshaving. My opinion has changed since this time, for both DE's and straights. It may be that my technique is lacking, but frankly my goal is not to become perfect, it's to get a good, comfortable shave.

[Suzuki]

The only reference I have seen that states there may be a quality difference between the DX & RG was from one of Joel's posts (http://badgerandblade.com/vb/showpost.php?p=247334&postcount=69) in the corking thread.


Well, there you go...who knew.

Now I may have to buy one of the stainless Feathers!

[Steelforge]

The only reference I have seen that states there may be a quality difference between the DX & RG was from one of Joel's posts (http://badgerandblade.com/vb/showpost.php?p=247334&postcount=69) in the corking thread.

That's pretty interesting, I hadn't read that before, thanks. :smile:

Makes me feel a bit happier about going for the DX at double the cost!

[MattH]

Sure it will be cool... I was going to buy one.. but ended up with a "real" straight.. but I'll be keeping an eye on what u think.

My razor has arrived so will have a go over the weekend.....

[Ricardo]

Sure it will be cool... I was going to buy one.. but ended up with a "real" straight...

The Feather AC gives you a "real" shave. In fact it gives a "real close" shave. :smile:

[MattH]

Thats why I am keeping an eye.. as Feathers are my DE blade of choice. :)

[Steelforge]

The Feather AC gives you a "real" shave. In fact it gives a "real close" shave. :smile:

That's what I'm after. :smile:

I still consider Feather AC's and Shavettes 'real' straight razors, just more modern incantations compared to 'traditional' straight razors.

[Ricardo]

That's what I'm after. :smile:

I still consider Feather AC's and Shavettes 'real' straight razors, just more modern incantations compared to 'traditional' straight razors.

I agree with you.

There is a current thread about "Shaving Myths". IMHO, one myth is. "you can only get a "real" shave from a "real" straight. I would add to that thread that you can get a "real" shave from a DE, disposable blade straight, as well as a traditional straight.

It's all about "the shave" for me. I do not have the time or interest at the present moment to maintain a shaving implement, which is what I would have to do with a traditional straight. At some point I may decide I want to explore the traditional straight realm, but for now both the DE and disposable blade straights address the convenience factor that our time strapped world demands.

Yeah I know we are all supposed "to slow down and smell the coffee", but if I slow down, I would rather do so to relish the actual shave rather than slow down and sharpen the edge of a blade.

No disrespect is meant to those who choose the traditional route, but if you lump the multi-blade razors such as the Fusion in with the DE and disposable blade straights, some common need is being addressed and I think that need is called "convenience". If I took a wild guess I would say this group that seeks some level of convenience represents close to 99% of the shaving market.

The Fusion is unique in that it addresses the market that seeks both convenience and low skill requirements (which is the largest portion of the shaving market), all at the price of increased costs. Gillette profits handsomely because they focus on this market. The traditional straight is, again IMHO, at the highest rung for skill in both the actual shave and maintaining the blade edge, but low on the convenience factor. The DE and disposable straight are right for the market that sits between these two extremes. Thankfully we live in a world where anyone's shaving needs can be met.

When friends ask me about my choice of a disposable straight over a traditional, I always say:

If you want a great shave, get a Feather AC

If you want a great shave and a hobby, get a traditional straight

[Steelforge]

Well, I had my first Feather AC shave today. Actually it went pretty well, my face was a bit tender after the beating it took from a Dovo Shavette/Feather blade yesterday and I was expecting to be looking worse than Joel.

However I lathered up with Proraso and had a go, with Feather Super Pro blades (the thinker ones). I did two passes, basically my normal passes but using almost no pressure at all. Like everyone has said before, the blades are just insanely sharp, they cut with no effort whatsoever. Even being a well practiced straight razor shaver, I was surprised at just how little margin for error there was. Too much pressure = weeper, too little pressure = rough spot. However I managed to get the feel right, the bulk of the razor makes it very stable and controllable. I got a BBS shave in two passes, I didn't risk any touching up as I didn't think my skin would stand it.

In all I'm very impressed to get such good results on day 1. I had a little razor burn but nothing much, and just a couple of small weepers which stopped after the cold water splash.

It shaves great, but my traditional straights shave more comfortably and are definately more forgiving. One other thing I've noticed, I was BBS earlier but I can feel the stubble growing back already and it feels more prickly than when it grows back after a traditional straight razor shave.

I'm definately going to persevere and get more practice with the Feather AC, it's earned a place in my rotation based on performance and convenience. I think it'll be perfect for travelling too.

:smile:

[Doc4]

Steelforge, good to hear things went well. :biggrin:

I use my Feather AC for travelling (as well as at home) and it travels very well. I like not having to bring a strop, and there is no worry about needing a hone should a nick develop. Just bring a blade dispenser and all is well.

[ScottS]

It shaves great, but my traditional straights shave more comfortably and are definately more forgiving.

:smile:

I can go along with the more forgiving, certainly, but wait a bit before you rule on the more comfortable part. How long did it take you to get the traditional straight shaving you comfortably? You probably didn't expect the best out of the tool on try 1. The AC is just a new tool, so give it a bit of a chance for you to get the shave perfect

Scott
600 or so AC shaves and counting

[Ricardo]

Great to hear that you got admirable results on your maiden voyage.

Ian and Scott have given you good advice. Give the AC the same dedication you gave the traditional straights and I think you will be pleasantly surprised.

[Steelforge]

Oh for sure, my traditional straights weren't exactly forgiving when I was learning to use them. I'm sure with practice the Feather will be giving me great shaves. I just hope I'm able to learn how to use both the Feather and traditional straights in the same rotation, rather than just one or the other.

[ScottS]

Oh for sure, my traditional straights weren't exactly forgiving when I was learning to use them. I'm sure with practice the Feather will be giving me great shaves. I just hope I'm able to learn how to use both the Feather and traditional straights in the same rotation, rather than just one or the other.

I think that will work for you, judging by how easily I can go from old blade to new blade on an AC as if it were second nature.

[Steelforge]

Probably, I had my second shave yesterday and it was almost perfect. Virtually BBS all over (2 passes) and just 1 tiny weeper on my chin, and a tiny patch of burn on my jawbone.

3rd shave coming up shortly. :biggrin:

[Ricardo]

Probably, I had my second shave yesterday and it was almost perfect. Virtually BBS all over (2 passes) and just 1 tiny weeper on my chin, and a tiny patch of burn on my jawbone.

3rd shave coming up shortly. :biggrin:

A few more great shaves and you may get a case of FAD (Feather Acquisition Disorder).

Fortunately, there would only be one other model for you to try and you don't need to go on Ebay to get it. :biggrin:

Keep us posted and hopefully you will join the handful of us on this forum that think the AC is a great shaving tool.

[Steelforge]

3rd shave went fine, even better than the first two. I have no fears about the Feather at all now, and am most impressed with it. I'm not abandoning my traditional straights but the Feather AC has earned a place in my rotation (of 4 razors), and will be perfect for travelling etc. :smile:

[ScottS]

3rd shave went fine, even better than the first two. I have no fears about the Feather at all now, and am most impressed with it. I'm not abandoning my traditional straights but the Feather AC has earned a place in my rotation (of 4 razors), and will be perfect for travelling etc. :smile:


Wait till you nick it on a tap, laugh while changing blades, and continue shaving.

BTW, many AC users eventually settle on a 2-pass shave.

[Patrick D]

Thanks for the photos there Joel, I just pulled the plug over at the mall on a Feather ACD-N Japnese Style razor. Those pics look a lot like my first time out with a Vision and Feather blade.

[Ricardo]

Thanks for the photos there Joel, I just pulled the plug over at the mall on a Feather ACD-N Japnese Style razor. Those pics look a lot like my first time out with a Vision and Feather blade.

It took me a while to correctly understand "at the mall".

I hope you enjoy Cigar Dan's Feather.

[Ricardo]

Oh for sure, my traditional straights weren't exactly forgiving when I was learning to use them. I'm sure with practice the Feather will be giving me great shaves. I just hope I'm able to learn how to use both the Feather and traditional straights in the same rotation, rather than just one or the other.

Hi Steelforge,

You are evidently someone who is giving the AC a fair shot and I see that you are very active over at SRP discussing traditional straights.

Can you comment on the difference of what your face feels while shaving with the AC vs. a traditional straight. I have never shaved with a traditional and I read many traditional users talk of a "pulling" sensation. I know that I do not experience any pulling sensation with the AC, but I wanted to know if there is a noticeable difference between the feel of the two.

How does the weight & balance of the AC compare to the weight & balance of a traditional.

Do you hold the AC at the same angle that you hold a traditional?

Am I correct in assuming the AC requires less pressure than a traditional?

TIA

[seamus402]

Holy Crap - what does the other guy look like?

[Steelforge]

Hi Steelforge,

You are evidently someone who is giving the AC a fair shot and I see that you are very active over at SRP discussing traditional straights.

Can you comment on the difference of what your face feels while shaving with the AC vs. a traditional straight. I have never shaved with a traditional and I read many traditional users talk of a "pulling" sensation. I know that I do not experience any pulling sensation with the AC, but I wanted to know if there is a noticeable difference between the feel of the two.


Hi there. I'll try and answer your questions but it's only from limited experience, there are other folks with far more experience than myself.



How does the weight & balance of the AC compare to the weight & balance of a traditional.

Basically it's the same, with a DX Artist Club (Stainless Steel) the weighting and balance are basically the same as a 6/8 straight razor with similar compound handle (wood, horn, plastic etc.). When I first picked mine up, it felt just the same as traditional straights.


Do you hold the AC at the same angle that you hold a traditional?

No, I would say you use a much flatter / shallower angle with a Feather than with a traditional straight.


Am I correct in assuming the AC requires less pressure than a traditional?

Definitely, much less! It's more like using a DE razor in this respect, you barely need to touch the blade to your skin, it's so sharp it cuts with no effort. A traditional straight is less sharp, and has a stiffer blade, so it goes though stubble less easily. On the plus side, a traditional straight keeps its edge much longer, and is much more forgiving of imperfect technique. You can use a fair amount more pressure than you can with a Feather, and you're still unlikely to cut yourself or get razorburn.

At the moment, I'd still say I prefer to use my traditional straights. The Feather gives a great shave, but is quite different to a traditional razor (still good though). :smile:

[Friggin Joe]

LOL.
Those pics looks like you tried shaving with an Uzi prior to switching to a straight.

[Ricardo]

Definitely, much less! It's more like using a DE razor in this respect, you barely need to touch the blade to your skin, it's so sharp it cuts with no effort. A traditional straight is less sharp, and has a stiffer blade, so it goes though stubble less easily. On the plus side, a traditional straight keeps its edge much longer, and is much more forgiving of imperfect technique. You can use a fair amount more pressure than you can with a Feather, and you're still unlikely to cut yourself or get razorburn.

At the moment, I'd still say I prefer to use my traditional straights. The Feather gives a great shave, but is quite different to a traditional razor (still good though). :smile:

Hi Steelforge,

You confirmed many of my assumptions.

Thanks for the perspective. :smile:

[M_Uribe]

Hi guys - I'm new to straight razor shaving, as well as new to this site. I've recently started with a DOVO 4/8 no frills carbon steel razor. I have about eight shaves or so. My question is, has anyone tried the pro guard blades? I understand the professional and super professional super blades are wicked sharp. I've been considering purchasing a feather no sharpen to get the hang of it so to speak. I guess if it was easy, everyone would be doing it. Good luck!!!

[TstebinsB]

Hi guys - I'm new to straight razor shaving, as well as new to this site. I've recently started with a DOVO 4/8 no frills carbon steel razor. I have about eight shaves or so. My question is, has anyone tried the pro guard blades? I understand the professional and super professional super blades are wicked sharp. I've been considering purchasing a feather no sharpen to get the hang of it so to speak. I guess if it was easy, everyone would be doing it. Good luck!!!

Welcome to B&B and enjoy your stay!

Your question would've been best asked in a new thread but I can help you out. I have used all the Feather blades and the only one I recommend are the Pro Supers. They are more consistent and the blade sticks out of the razor at a better angle than the other blades. The Pro Guard blades are virtually unusable.