Black and Bone Restore

[SpartanFan]

I had seen the brush at an antique store and passed on it once. A couple of month later I saw it again and gave it a second look. I am sure glad I did and it took awhile to restore but was well worth the work.


134622134623

Once I got it home I realized that it unscrewed which made the restoration a lot easier. The old knot drilled out fairly easy and I could go from the bottom up. All the old paint in the lettering got removed and filled in with automotive paint and then sanded down. Then I sanded the whole think through 1200 grit and Maas and Flitz. The bottom bone piece got filled in with epoxy to add weight and stabilize the piece.


134625

A 20mm SuperBadger from the Golden Nib was set with a loft of 40mm. I could set the expoxy from the bottom and make sure it filled in nicely.


134624

Then more epoxy to the set the two pieces together and it was done. The total brush has a height of 111mm. It has a nice feel the knot is extremely soft but not floppy. It took some time to do this piece but I am really happy with the way it came out.


134626

[SpartanFan]

134627
134628
134629
134630

[altshaver]

Well done! I have seen your other brush restore threads. You appear to be quite talented. How does this brush feel in the hand? Is it light do to the top half being hollow? How was the condition of the thread? Did you glue the top and bottom together or did you just screw them together? Again, well done!

[djh]

Another lovely brush! Thanks for the pics.

[Muscles]

:thumbup:

Outstanding job, I may just keep the couple of old brushes I have lying around for a rainy day restore...

[Hex]

Wowsers, but that's a beauty.
Nice work.

[spindlecone]

Thats great,have a box full of old brushes,will see if any unscrew like yours.

[55dougie]

Wonderful restore! The bone is really nice and I like how you went about the restore. Filling the bone with epoxy was a good idea as these can split from the heat of water etc..... Well done.....:thumbup1:

[Antique Hoosier]

I really like what you've done here. A real Classic... Thanks for sharing!

[pdmcadams]

That's an awesome restore! For someone who is tentatively starting to restore some brushes, could you go into more detail on the lettering i.e. how did you get the old paint out, what type of automotive paint, etc. Many restores that I see don't include the detail work on the lettering and it certainly takes it to another level!

[Scrom]

Beautiful!

What kind of epoxy did you use?

[Brush_with_Fame]

Gorgeous restoration... I heard that some brushes unscrew as a way to store soap, say when traveling...

[Schwert]

Really nicely done and that bone base is unique too.

An excellent bit of work.

[Lucky11453]

Very nice...you did a get job on that Ever-Ready.:thumbup1: It should make a great brush for you.

[SliceOfLife]

I love bone/teeth shave brushes. And this one's a beauty. Nice job.

[beginish]

Gorgeous restore. :thumbup1:

[Darjeeling Express]

Now THAT is a restoration! Well done!

[malocchio]

Well done! I have seen your other brush restore threads. You appear to be quite talented. How does this brush feel in the hand? Is it light do to the top half being hollow? How was the condition of the thread? Did you glue the top and bottom together or did you just screw them together? Again, well done!

Great job !! Count me in on the secret of re-lettering the handle so perfectly !!!

[kg4ghn]

Great job !! Count me in on the secret of re-lettering the handle so perfectly !!!

If it is like the "sterilized" on the back of the brush that is recessed you can just paint over the whole word then wipe the excess off leaving paint in the recessed part.

[Gamma]

Gorgeous brush - nice restore - I don't think I've ever seen a finer brush! That's a keeper for sure.

[SpartanFan]

Thanks for all the nice comments. It was a labor of love and I am still breaking the brush in. I was concerned that it was going to seem long and have a weird balance but that is not the case at all. The SuperBadger knot is really really soft and I am glad I set it at the loft I did otherwise I worry it would have been a bit floppy.


How does this brush feel in the hand? Is it light do to the top half being hollow? How was the condition of the thread? Did you glue the top and bottom together or did you just screw them together?

The brush is nicely balanced. It's not too light. It is not hollow anymore. After I set the knot, filled in the bottom with epoxy, the rest got filled in with more epoxy and then screwed together to secure the whole thing together. Basically it is all filled in with epoxy now. The threads were in good shape. I was surprised and thought a brush made out of bone would not be in that good a shape but it really was smooth to screw together.


For someone who is tentatively starting to restore some brushes, could you go into more detail on the lettering i.e. how did you get the old paint out, what type of automotive paint, etc.

Count me in on the secret of re-lettering the handle so perfectly !!!

The paint is basic automotive touch up paint that comes in the little vials with a pen tip on one end and a small brush that is attached to the cap. The key to this brush was in fact that the lettering had deep impressions. I over filled the lettering with paint and then sanded it down flush with rest of the handle. It then takes alot of sanding - working my way up to 1500 grit and then several polishing compounds - hand done not on a buffing wheel. It worked out that everything was flush, shiny and the lettering was crisp. I have one handle in the works that is not going to turn out quite as nice because the lettering is not as deep and the sanding has removed too much material.



What kind of epoxy did you use?

134788

This is the stuff that I use. You have about 1 minute working time so I need to make sure everything is prepared and ready to go. The self mixing tip comes in handy and I can get a small amount in just the right place. I know some guys only use the marine grade stuff but I figure that it is water resistant and is not submerged for long periods of time.


Gorgeous restoration... I heard that some brushes unscrew as a way to store soap, say when traveling...

I have heard that notion before. I'm not sure if I can subscribe myself as a believer. It makes logical sense but it does not seem very practical. This brush did not show any signs of it ever being used in this manner. I could be wrong as some brushes have a much wider diameter and it would seem that those brushes would be more practical in usage that way.

[DogHair]

That looks great. I had no idea those handles were bone.

[grump]

Very nice, I like it.

[The Count of Merkur Cristo]

Sparty:
That's one hell-of-a-fine looking brush...well done my friend (from one Michigander [I was born in East Lansing], to another). :thumbup:

Christopher :badger: